Idbill Posted July 17, 2014 Report Share Posted July 17, 2014 Is there anyone in the Seattle area that would be willing to be paid to create 9 octagonal finials? They are approx 7" x 7" x 7" I've included a picture of the original (very rough looking), and a rough contour outline. The contour (in white) is a solid piece of laminated wood, and the grey piece is trim attached to the outside. (Note the 'top' shown in the picture and not the contour is a separate piece.) I attempted to cut this on the band saw but my 14" band saw doesn't have the cutting depth. With patience this is do-able, but requires a 16" band saw or 14" with a riser. I'd charge $100/ea I'd also build it with 2x8 cedar lumber which is $50 for a 6' board, but softer than Southern Yellow Pine and would have better longevity. I'm asking for someone, so if you're interested, I will show you what I've learned and will connect you with them (they are pre-internet). Thanx, Bill Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.