Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing porous woods with bees wax?

Featured Replies

Hey, guys.

I'm wondering, I have some fairly porous woods that I'd like to use, but don't like the look of all these little perforations in my wood. I use tung oil a lot of the time and achieve very glossy finishes (Love it. ^_^), but on porous woods, this technique will only result in an unattractive (Generally) contrast.

I saw this technique where someone applied bees wax to a wood, heated it very gently to melt it and to let it absorb into the wood, then simply polished it on a buffing wheel. But I'm wondering, will this fill in the pores of woods like Mahagony, cocobolo and things of that nature?

Also, I heard you could mix it with Tung oil or linseed oil, anyone have experience with these methods?

Thanks a bunch,

Salvatore

If you do that you'll end up with light colored wax against the dark color of the Mahogany. If you really want to fill the grain, and you are planning on using tung oil, then simply flood the surface with the oil, and wet sand it into the wood with 220 grit paper. It's going to make paste using the dust so your pore filler instantly matches the wood.

After going over the surface keeping it flooded, wipe off the excess slugde and let it dry. If it needs more after that, just repeat the process.

The traditional way is to mix Bee's wax into turpentine until you obtain a smooth reasonably thick paste, this you can colour to any shade you want using normal oil based stains. The only real drawback with bee's wax is it is not a very hard finish, is not hard wearing nor heat or moisture resistant. You would be better off, with really open grains to fill them first. Either a proprietory filler or, good old plaster of Paris mixed with the stain of your choice, rub it in well across the grain, wipe off carefully along the grain. Leave for a day or two then sand lightly. If there is a slight whiteness anywhere, the traditional way was to wipe an almost dry rag of linseed oil across it to 'kill' the white. After this you can apply almost any finish you like, but watch out for some of the spray finishes not being compatible particularly if you've been over zealous with the linseed.

Pete

  • 3 years later...

Old topic, I know. Just wanted to add a recent experience. I filled the grain of a red oak table top with plaster of paris mixed with black dye. It was a real pain to remove all the excess plaster, lots of sanding. It was pretty scary to see my nice top turn purple from the dye, too. However, once I made everything smooth again and applied a flood coat of BLO, the top is nice and smooth, with just a hint of texture in the growth ring pores. Also, the black filler makes the grain stand out in high contrast to the rest of the surface, even though it is stained fairly dark. Gives the oak an appearance similar to zebra wood, at least to an uneducated eye. Plaster sounds like a cheap trick, but I won't hesitate to use it again!

Don (of Don's Barn) has some articles on wax-finishing with Mahogany. He spent several decades with the Smithsonian as a Conservator and related positions -- i.e., he'll forget more about finishing than anyone of us will ever know... :)

 

Don also teaches classes in traditional finishing at his shop...

 

Don also tools/finishing aids -- I used one of his 'Roubo Polissoir' and traditional techniques on a Chippendale-style Keeping Chest in Genuine Mahogany for my parent's fortieth anniversary...

 

The finish is awesome, but wiping some Arm-R-Seal or shooting lacquer it's not... The finish is really something, but for many, it may not be worth the effort... The Barn: http://donsbarn.com/the-barn/

 

Here's an article from the Schwarz on Wax Finishing: http://www.popularwoodworking.com/techniques/finishing/my-introduction-to-the-polissoir-roubos-wax-polisher

 

Good luck...

I made a few things with mahogany this year, and was really into an oil finish with a coat of wax on top.  The first time I only had clear wax, and not thinking applied it as I would to any other (more close grained) wood.  It looked terrible, there was no way to buff it in the pores.  I ended up using my wifes hair dryer, which melted the wax in the pores, and then gave it a good buffing, and then it looked great.  I have since bought a few different tinted waxes to avoid this in the future.

 

So the heating trick will work, but I would tint the wax if possible.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.