chefmagnus@grics.net Posted October 17, 2014 Report Share Posted October 17, 2014 I have Titebond 2 and 3 as well as Gorilla Wood Glue and a tube of Loctite PL 8X construction adhesive. Which would you use for putting together the laminations of plywood for the side rails? I plan on drilling and carriage bolting with fender washers the sides in a number of places as well. Thanks to all of you who have helped me past and future with my little project. Chef Quote Link to comment Share on other sites More sharing options...
wdwerker Posted October 17, 2014 Report Share Posted October 17, 2014 Titebond 3 has a longer open time to let you spread all the glue and get the clamps on the stack to laminate it . Quote Link to comment Share on other sites More sharing options...
chefmagnus@grics.net Posted October 18, 2014 Author Report Share Posted October 18, 2014 I have a gallon, think that will be enough? Chef Quote Link to comment Share on other sites More sharing options...
wdwerker Posted October 18, 2014 Report Share Posted October 18, 2014 Yes, coat both surfaces thinly but don't waste it. You should get some squeeze out when you clamp but not come flooding out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.