Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I'm now terrified of my router

Featured Replies

I'm a novice wood worker, been doing general home construction for years, and I'm very comfortable around power tools. I've got a couple small projects under my belt (end grain cutting boards, small little things for the house) and I decided to build my own version of the wood "six pack" as a christmas present for some friends. Mine "was" going to have a more traditional style handle, with the handle cut into the wood, rather than just screwing on a metal handle, and it was while cleaning up the inside of the handle that I really ran into issues. 

 

post-16639-0-23424100-1420222322_thumb.j
 
Basically while cutting the handle shape out, the entire piece just blew up in my hand and flew across the room. I literally have no idea what happened. I've routed several different pieces using different bits and both handheld and in a router plate on my work bench (this was bench top). The first time it blew up I screwed up my thumb some and it's still hurting. I looked at my router bit and the bit itself was actually bent. I assumed at the time that that was what caused my issue, but I now think that the bent bit was a result of something else I'm doing wrong. I replaced the bit and hesitantly resumed trying to salvage the piece figuring I could glue all of the pieces back together when I was done. Bam, happened again, with a new bit. I've had this really hard "kick" happen to me now 3 or 4 times, and it has me so gun shy I'm literally jumping and actually doing more damage to the piece everytime there's any kind of speck or noise or anything happen to it. The last time I even tried moving the piece with a couple of push handles from my jointer and the piece was thrown from under the handles across my bench. 
 
I'm now scared to even look at my router, much less plug it in and use it, and I have no idea what's going on , if there's an issue with the wood, or the router, or my technique, I couldn't even begin to tell you. I attached a picture of the handle which is now in 4 separate pieces. My setup is a Porter Cable variable speed router, set to 23,000 rpm in a Kreg Router plate on a plywood bench top. I'm using a 1/2" straight bit in the router. The wood is 1/2" purpleheart and hard maple. I thought the glue joint might be the source of the problem, but most of the kicks have happened when just routing straight through the purple heart. Please help me figure out what I might be doing wrong, and then after that, any advice on how to get over the fear of using the tool now?

 

post-16639-0-23424100-1420222322_thumb.j

Purpleheart is very dense and can be tough on machines...same for hard maple really.   Were you using quality router bits?    It sounds and looks like maybe you were going the wrong way against the grain on those very hard woods and it blew out pretty spectacularly.  You may also have been trying to take too big of a pass.   What were you using to control the piece to route the handle?   You surely weren't just freehanding it and had some kind of template, right?

Scary!

 

My guess/assumption is that you are taking too deep a bite on the end grain, perhaps exacerbated by going in the wrong direction (climb cut) because you are routing the inside rather than the more normal outside. Were you using a template and bearing on a router table? If not, you probably should, and don't start routing until the workpiece is just proud of the template. If your fingers get close to the bit make it oversized and put a couple of (crude wooden) handles on it, double stick tape the workpiece to the template. A spiral bit would likely also help.

 

(Or a spindle sander might be less stressful!)

 

Cheers,

Brian

yes, i agree with the above. looks like you are trying to take way too much material at one time, and perhaps in the wrong direction. also, the bit should only be contacting the work piece on one side. you need to take a step back and learn more about how routers work, and how you are supposed to use them. they can be very dangerous machines if used incorrectly - as you have learned. consider yourself lucky that more damage was not done to your personage.

 

find some online tutorials, read some books, talk to some woodworkers. practice with softer wood first - learn how a router feels when it is cutting correctly.

 

scary stuff! glad you are not physically hurt too badly, but the damage to your confidence needs to be healed before you try to route end grain hardwood again. a lack of confidence and being scared with a live router is a recipe for more disaster.

 

Good luck!

It looks as though you don't have any guidance for the router and it is going where it wants to go. Take as much waste out as you can using drills or a Forstner bit. Make a template of the shape you want out of plywood first of all. Stick the template to the work with double sided tape and use a bearing guided bit in the router. When cutting internal routs move the hand held router clockwise, take shallow cuts gradually working to full depth.

External routing (around the periphery) with a bearing guided bit move the router anti-clockwise (counter clockwise).

For more info about template/pattern router bits have a look at Marc's article here http://www.thewoodwhisperer.com/videos/flush-trim-bits/

BTW welcome to the forum.

I too experienced a bit of "router-terrification" when putting together my xmas gifts.  I realized after discussing it with the wise folks here that I had been biting off more that the router could chew...so to speak...and was not routing in the correct direction.  So I too will be educating myself a bit more thoroughly before heading back to the router table.

Looking at the work piece, it looks like you were free handing on the router table, which is a very unsafe operation.  Looking at it further, it looks like you were doing one big through cut which is too big of a bite.  Without realizing it, you probably got yourself in a climb cut situation (the danger of free hand table routing) and the force of the full depth cut is what sent your piece flying.

 

If I were making a handle cut out on a work piece, I would make a template out of MDF or hardboard.  Position the template on the work piece where you want the handle cut out to be, and draw a line for your handle.  Making sure you leave the line rough out the handle opening with a jig saw, forstner bit, scroll saw, coping saw, or any other method you may have available to cut out as much material as possible.  Once you have it cut out, using double sided tape, attach your template back on to your work piece, lining it up with your pencil lines.  Back at the router table, using a flush trim bit, a starting pin, and push pads you will be able to clean up the cuts.  Hope that helps

When cutting out your handle you have four catch points in a confined space. See pic.  Since a router can't be reversed you need to flip the work piece to eliminate two of the catch points, this can be a pain. Generally the the straight bit would be the wrong tool for the job. A spiral bit with a bushing and template needs no pre hogging and can just be cut out of the solid work piece. This is done with the router out of the table and the piece clamped to the bench. 1/2 material can be cut in three passes actually two but you would want to onion skin the last pass. This means on the second pass leave only a very thin final cut about .040. This remaining paper thin last pass keeps the waste center in place. When you make the final pas the remaining thickness is very thin and should not slip within your recess. 

 

post-5350-0-96860200-1420241047_thumb.jp

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.