Recommended Posts

Posted

Tax season is upon us and spending my tax return mostly on tools. I've got the following in my list, and I'm up in the air on a few things.

 

I know these topics are beaten to death in the past, however things change over time and it's good to refresh after people work with them and use various attachments or accessories that are useful.

 

 

Festool Domino DF500 OR Domino 700 XL

 

I'm torn between the two, I think the 500 should suit my needs just fine. However I hate having buyers remorse down the line. If anyone can think of a reason to go big or go home please by all means let's hear it.

 

Festool TS55 Tracksaw OR TS75 Tracksaw

 

I have a 3HP cabinet saw so I don't anticipate doing any big thick hardwood rips with it. My primary use right now is breaking down sheet goods and an occasional table top cross cut. Since I'm planning on building a Roubo this year and I'm aiming for a 4" thick top the TS75 would be a good option for squaring up that top. The pros to the TS75 is it's capacity, but hear it's a bit unwieldy for most tasks.  Thoughts?

 

 

You Must Accessorize!

Festool CT48 Boom Arm

36mm Anti-Static Host - 11.5 feet

Complementing Domino kit for the domino I get

 

55" Tracksaw track to couple to the track of the saw I get. I would imagine the 105" track isn't needed if you join two 55s together with the coupler.

 

 

I've tossed around the idea of getting either an MFT3, ETS 150/5, or OF1400. 

 

Is the MFT3 really that useful in a shop? I see it more for jobsite portability. Though it does have it's draws. I think though for big cuts breaking down sheets can be done on saw horses. Shop space is at a premium.

 

ETS 150/5 could probably wait, it's more of a upgrade luxury right now. 

 

I could use a good medium powered plunge router now though. 

 

Maybe pickup a Woodpeckers One time framing square for aligning tracksaw tracks on the work piece.

 

 

 

Finally.... OOOOHHHH YEA!!!!!

green-kool-aidman1-300x284.jpg

Posted

All good choices T.

 

As I have most of the items you listed above (no MFT and the XL is on order), I find them all to be very awesome to have in the shop!  

 

I think it's more important to look at your funds and buy the more expensive stuff first.  Point is that you'll have a healthy chunk of cash and it may be a while before you have a chunk like that again.  It's easier to save for less expensive items.

 

I will contribute the following..  I have the 75.  I also had the 55 and FT upgraded it for me free (recall for those that remember) and I never honestly wished I had the smaller one again.

 

I love the OF1400!  However, if the Bosch 1617 had the same dust collection, I would like it just as well.

 

There are places for both Dominos so, really depends on your work flow.  I haven't ran into a place yet where I couldn't have used the XL so, that may have been a better purchase for me up front rather than the 500.

 

An item I don't see on your list is the Kapex?

 

As for the MFT - Maybe my shop is just way different than everyone elses but, I just don't see a need for it.  

Posted

You only need the small 27 mm hose for the Domino. 36 mm for the tracksaw . I've got the 75 and it's not to heavy for anything I have used it for.The 75 comes with a 75" track. I liked being able to get a 12ft long glue line ready cut in 5/4 oak planks for a bar top. I also got the 118" track. Seam behaves well.

I see no need for such a big vac, my CT26 has the same motor and power, takes up less space and I haven't had to empty it more than once or maybe twice a week in my small pro shop.

So far the 500 Domino has been sufficient for me. A 10mm domino is roughly 1/3 of 8/4 stock when dressed. You can always stack 2 dominos vertically if you need more strength . Check out my Mahogany Rolling ladder Project Journal it shows several domino joints.

Posted

An item I don't see on your list is the Kapex?

 

I'm so on the fence about the kapex. In my mind I still see miter saws as a tool for framework. I know the Kapex is much more than a miter saw, but I don't feel I have the space or the motivation to build a system for a huge miter station to do long cuts on boards . I rough cut it by hand since my CMS can't handle boards wider than 5". All of my cross cuts I do on my table saw with my Incra Miter sled. I've gone as big as 8' boards on my table saw. 

 

 

I see no need for such a big vac, my CT26 has the same motor and power, takes up less space and I haven't had to empty it more than once or maybe twice a week in my small pro shop.

 

I already have the CT48. I got it during Festool's last refurb sale. It was pretty much brand new when it got to me with the exception of some dust on the wheels. I paid something like $430 for it, so I can't complain it's too big. I was thinking of getting the boom arm for it though since I hate having to schlep the hose all over the place. I could make a boom arm, but I'd rather spend my time doing other things in the shop.

 

 

So far the 500 Domino has been sufficient for me. A 10mm domino is roughly 1/3 of 8/4 stock when dressed. You can always stack 2 dominos vertically if you need more strength . Check out my Mahogany Rolling ladder Project Journal it shows several domino joints.

 

I'm thinking the DF500 kit is my best bet. It's biggest use at first will be for some cabinets, face frames and such. The kit has the trim stops and some other stuff included with it. Also after giving it some thought, I could use the Domino for increasing the strength of some segmented turning sections.

Posted

Use small dominos and careful layout to keep from exposing one while turning. 4 mm dominos are pretty small 5/32 x maybe 1/2" and about 3/4" long.

You can build a jig that holds the domino with a fence then set up stops w a clamp to motice small parts. Holler if you need help figuring it out. I've got all the stuff to build mine, just haven't had a pressing need for it yet.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 43 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined