Firehawk Posted January 16, 2015 Report Posted January 16, 2015 Hi All, The Tool Nut has the Festool 564525 TI 15 Impact Driver and Drill Lithium Ion Set on sale for $389 vs the $525 regular price. I have heard some poor reviews on this model saying it wasn't worth the $525. Is it worth it at $389? What were the issues. Thanks for any opinions from anybody that currently has one. Mark Quote
Firehawk Posted January 17, 2015 Author Report Posted January 17, 2015 I am surprised with all of the festool users here that no one could offer an opinion one way or another! Should I have posted this in another section? Quote
Tpt life Posted January 17, 2015 Report Posted January 17, 2015 85 views... There is a stated opinion that I think is prevalent in this place. Most seem to think that drills and drivers are very good in several non Festool priced product lines. Your post is not in a bad place. Quote
Firehawk Posted January 17, 2015 Author Report Posted January 17, 2015 Thanks, I understood that. I am tempted at the 30% off. I was hesitant because I wanted to make sure that there were not an overly negative aspects to that particular model. I have a CSX and love it. I thought this would be a good compliment to it. Quote
Tpt life Posted January 17, 2015 Report Posted January 17, 2015 It may well be. Have you tried FOG or any other type group? Quote
Mzdadoc Posted January 17, 2015 Report Posted January 17, 2015 I used two models of FT drill drivers in my class at Woodcraft and honestly all the instructor said about them was how many huge screws could be drilled in a 2x4 until it would die. Using it didn't blow any wind up my skirt and not for that price. I'm in love with my Dewalt two pack of 20V brushless drill and driver. My belief as a beginner FT has tools that are head and shoulders above other products and then some can be found to be no better or worse than cheaper brands. Quote
cabinfever Posted January 17, 2015 Report Posted January 17, 2015 I have two Festool drills, two Milwaukee drills and a Ryobi. I like the Festool for the specialty chucks, but my Milwaukees are awesome too. One knock on the Festool is you have to get into their Centrotec system to really make the quick change chuck useable. If you are going to use a normal Jacobs chuck most of the time, why bother with Festool? The eccentric chuck and right-angle chuck are handy at times. I bought a Milwaukee impact over Black Friday... and its smaller and hugely powerful with two 18v Li-ion batteries. And it was $90. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.