Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

A slight twist

Featured Replies

I'm working with some Mahogany for the Greene and Greene inspired Blanket Chest Guild build and a couple of my 4/4 pieces I'll be (hopefully) using in the side panels have some slight twist to them. I can put a little weight with my hands on the ends and flatten the boards out. I've also done a dry clamp up and without much effort can get everything flat and flush across the three pieces in the panel. I'm going to be using my Domino to align and join the boards at glue up but I was curious if you guys had any input or thought I should be concerned with the twist. If it was really drastic I wouldn't even bother, but it doesn't appear to be that bad. 

 

 

I built that and it's about 40" or so. How wide of boards are you using and have you planed them down to final thickness?

I wouldn't sweat it.  The panels are all getting screwed together so if there's any twist in the panel once it's glued up, it should be fairly self-straightening when it's assembled into the case.  There's not much you can do at this point anyway unless you wanna end up with thinner panels or build a new panel altogether out of a different board.  I'm assuming you've already milled the lumber to final dimension...

  • Author

The twisted board will be on one of the side panels so they'll be roughly 15.5 x 23ish when complete. I'm thinking if I put this little twisted board in between two other true boards and draw it together from both sides it'll tighten up.

 

It's currently at final dimension, thank you very much Bell Forest ( I don't own a jointer ). 

I don't own a jointer.

But you have a Domino? Interesting choices.

  • Author

But you have a Domino? Interesting choices.

 

Not if you generally have access to straight lumber. :) Primarily I can get what I need S3S locally or through Bell Forest.

 

I don't deal with a lot of rough stuff, it's in my plans, just not at this time. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.