Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Water Based Stain with Oil or Water Based Top Coat?

Featured Replies

So working on finishing my maple table and have ran into this ... I am not sure the route I should go after reading/watching a lot on it.

 

 

I would like something that will not amber the stain. I have read that waster based dry really quick which can lead to issues and uneven coats. The oil will give me more time to work it and have better chance of making everything nice and smooth.

 

I just do not know if it is advisable to add an oil top coat over a water based stain. Am I stuck with a water based top coat?

 

 

 

Has anyone worked with the below products? Are any better than the others or are they all about the same?

 

As far as applying ... with water based I need a brush correct? I also think it is a natural bristle brush too?

 

 

Thoughts?

 

 

 

 

5_zpsmlygq22v.png

 

4_zpscdabditz.png

 

 

 

 

1_zps0lkwp7fo.png

 

 

2_zpsebbeab25.png

My choice would be the Enduro-var after all a table is going to get stuff spilled on it. It's going to get cleaned often plus general wear and tear, abuse etc.

Sounds like a good excuse to get a Fuji HVLP and spray some waterborne topcoats. 

  • Author

Ok so sounds like general finishes is the best. Also sounds like I can just let the water based stain dry for several days and then I should be able to use an oil based finish to help bring a little more sheen to it.

Why does water based leave a dull finish? Even if I go with a semi gloss over a satin? Would that help give it a little nicer look?

Correct?

  • Author

Sounds like a good excuse to get a Fuji HVLP and spray some waterborne topcoats.

Haha I wish. There is a lot more I need before I can invest in a spray machine.

  • Author

You can get it glossy, but because it is colorless it looks dull/almost blue-ish. That being said, GF endurovar is tinted amber to help give it some life.

Ok so the Amber is what helps give it the shine and helps the wood pop a little more?

Then the oil based would give it even more?

  • Author

Not really . I think your best bet is the Enduro var. So much easier to use, dries faster too.

Ok I will grab some of that for sure. I know this is a preference question but do you like the look of satin or semi gloss better? I don't want a super dull finish but I also don't want a mirror finish either.

  • Author

Satin will look less plastic. It will also hide minor imperfections better than Semi or Gloss.

Oh ok. Decisions decisions then [emoji27][emoji27]

Maybe I will get both and test them on my test strips.

Also. If I keep the kids closed. How long does the stain and finish last in there before I need to replace it?

Clean the rim of the can and lid well before closing. Stains seem to last longer than finishes for me. 6 months to a year or more if the finish isn't catalyzed. Read labels and MFG data sheets closely.

Bent or dented rims and lids don't seal well. Clean and unbent rims seal and the contents last longer. Consistent storage temperatures help too, basement is better than a backyard shed. In the house is probably best for water based finishing supplies.

  • Author

Clean the rim of the can and lid well before closing. Stains seem to last longer than finishes for me. 6 months to a year or more if the finish isn't catalyzed. Read labels and MFG data sheets closely.

Bent or dented rims and lids don't seal well. Clean and unbent rims seal and the contents last longer. Consistent storage temperatures help too, basement is better than a backyard shed. In the house is probably best for water based finishing supplies.

Mine will be in the garage unless something crazy happens and nothing last that long. Then I may look into a solution inside the house.

Your in Texas aren't you? I doubt your garage gets cold enough to hurt water based finishing supplies. Just to be on the safe side you could put them near an interior wall.

Hey Mike, you have a link to where it says that the "clear poly" is more durable against the Enduro-Var and High Performance? 

 

-Ace-

Ok got ya!

 

The clear-poly is a spray only product and I believe ( I remember something that GF was adding cross linker to the clear poly at manufacturing) instead of offering it as a separate purchase item, so yes it tougher. I could be off on this? it was early last year sometime they made the change and raised the price of the clear poly.   

 

Yep Enduro-Var will amber. Are you using GF white base?

 

-Ace-

Well to be fair, no one is going to buy the "fairly durable" poly sitting right next to "able to survive a nuclear explosion and then sit in water for a thousand years and still barely bend when struck by Chuck Norris" poly.

Here's a damage test I did using GF Enduro-var, High Performance, and Old Master's waterborne poly's. All are good products but I like Old Master's the best plus can get it locally for a lot cheaper than the others.

 

I was going to put it over Milk Paint that I had custom tinted by a GF dealer.  I have not started that project yet.   I am using High performance because it will be good enough for my purpose (interior window and door casings).   That way I can spray in the shop and then touch up with a brush if needed.   

 

The website says clear poly is self-cross linking but you can also add Enduro Crosslinker.  

 

If your spraying, ya may want to go with the clear poly tinted to the color of the milk paint and call it done. 

 

If brushing, the GF milk paint is very tough on its own and considering what your are coating, the high performance isn't necessary. 

 

-Ace-

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.