Recommended Posts

Posted

Probably not a bad deal....

Question to ask: Did it come from a production shop or hobby shop? issue is wear and tear.

Check arbor bearings to see how worn

Check blade tilt and raise/lower mechanism to be sure it works.

Take wood to test cut - I wouldn't buy it unless I could hear/see it run.

It is a right tilt which works fine but it's a little to get used to if you're used to a left tilt.

Posted

I purchased nearly an identical saw like this last winter. It runs like a champ, but dust collection requires a lot of retrofitting. I've managed to seal mine up for the most part, but likely due to the 4" inlet I'm using and collection at the bottom, still need to adjust to collect more of the fines. Only changes I made were to replace the belts with link belts and replaced the switch housing to use a paddle switch.

Be sure you have the chance to run it before purchasing and give it the nickel test to check for vibration. Bring some wood to rip as well.

For $500, if it runs smooth and the top is flat, go for it.

Sent from my iPhone using Tapatalk

Posted

If they don't have the shipping bracket for the motor, remove the motor before driving any distance. There's only a few bolts holding it on and you don't want them to shear off as you go bouncing down the road.

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 43 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined