JoshC1501 Posted April 5, 2015 Report Posted April 5, 2015 Was getting ready to cut tenons for the long and short tails on my Roubo project when my dado stack wouldn't go down far enough. Hand wheel just wouldn't move further down. Start investigating and find the belt lose and off. Start feeling around and realize the motor pulley has moved and is preventing the lowering. Take off the motor and the pulley slides right off. Either the set screws came out or where never put in. The later looks likely as u can't see any marks on the arbor. I have had no complaints with this saw up to this point!!! Guess I will be calling Grizzly on Monday. Might see if I can find proper sized set screws locally tomorrow. Not too excited about having my saw down for a week while I wait for shipping! Quote
Shane Jimerfield Posted April 5, 2015 Report Posted April 5, 2015 Hmmm...I think I'll have a look at mine to make sure. You should be able to find one rather easily, if not then ask for overnight shipping. Quote
trz Posted April 5, 2015 Report Posted April 5, 2015 No need to be down for a week, any hardware store should have the prpper soze set screw! Quote
JoshC1501 Posted April 5, 2015 Author Report Posted April 5, 2015 No need to be down for a week, any hardware store should have the prpper soze set screw! Hope so!! Quote
wtnhighlander Posted April 6, 2015 Report Posted April 6, 2015 If not, I bet they sell one that has a matching drill bit and tap! Quote
JoshC1501 Posted April 6, 2015 Author Report Posted April 6, 2015 Called Grizzly this morning, machine was still under warranty so they are sending me set screws and a new pulley free of charge.. No questions asked and they where very apologetic about the problem. Found the set screws at my local Ace hardware so I will be back running tonight. Looks like I will have some backup parts in case this happens again. Quote
dwacker Posted April 6, 2015 Report Posted April 6, 2015 Use blue lock tite on the set screw. 1 Quote
Mad Hungarian Posted April 11, 2015 Report Posted April 11, 2015 Yep, my newish Grizzly 1023 also had some screws that quickly came loose -- in my case it was on the clamp thing you insert the splitter into. Slightly disturbing because something metal could've conceivably fallen into the spinning blade. But apart from that, i'm happy with the saw so far. Grizzly seems to have a reputation for occasional loose bolts in their tools. I guess that's the price of the lower price. If you want better QC (which doesn't come cheap), you've got to shell out some more money. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.