Recommended Posts

Posted

I just got an old Rockwell/Delta 46-525.  It's got an outboard spindle that is 1x8 LH thread. Can that be used for turning?  I've found hand wheels in my search for answers, which I'm assuming was what it was intended for.  The only problem I can see with using it to put a face plate on and turning is the fact that I can't find a face plate with those threads.  Grizzly makes something that looks a little sketchy.  I'd love to have just a regular 4" aluminum face plate.  I did find a 3/4 x 16 that I can probably drill and tap to my size.  

 

Any ideas?  Or is it a bad idea in the first place?

Posted

yes you can turn outboard..asMcQ said the old Delta stuff was cross threaded.  that way you could still turn from the same side.  I'd check with Craft supplies USA ..packard woodworks, and Penn State Ind.  ..they may still carry 1x8Left..or they can tell you where you might get one

Posted

They weren't labeled as such. I did an online chat and they pointed me towards a 4" and a 6" Oneway that they said was cross thread. They weren't labeled as that either, actually. According to Josh, they were threaded to go either right or left.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.