Greg Weiss Posted September 11, 2015 Report Posted September 11, 2015 Hello and thank all ahead of time, currently been in the market for a wood jointer. Have a co worker always on the look out for deals. He has a neighbor who is selling an older Atlas (possibly 6001 model) jointer. My questions are really what should I be looking for, and or worried about. I have not gone to see it in person yet, but the co worker has taken a few (un focused) pictures of it. Should go talk to the owner here in the next few days and get more information if needed. Thanks Quote
Andy Wright Posted September 12, 2015 Report Posted September 12, 2015 If the tables and fence are flat and the motor runs smooth then the tool should work fine. Be sure you can get replacement knives for it. Not sure if you care, but keep in mind that there is no dust/chip collection. Jointers don't make much sawdust but they make a crap load of wood chips/shavings. If you run that thing for 10 minutes it will probably bury your shoes in a pile of shavings Quote
Pwk5017 Posted September 12, 2015 Report Posted September 12, 2015 It has the dust chute that most modern jointers use, but it isnt enclosed and it doesnt have a port at the end. Those would be pretty easy retrofits. I know next to nothing about atlas other than they are older machines. pre-40s even? I will let the experts give you the historical background on it. For me, this machine would have to be $100 or under for me to take it. I would also have to be really low on cash. The 6" jointer market is typically flooded with a bunch of machines that are less than 10 years old and sell for $250ish. My first jointer was a used ridgid 6" jointer and it was a pretty good little machine. Im sure the jets, grizzlys, and even the closed cabinet craftsman model are good machines as well. You should have lots of options out there for 6" jointers that arent pushing 70 years old. Quote
matthew-s Posted September 12, 2015 Report Posted September 12, 2015 I just picked up an Atlas drill press and love it, if that means anything to you. Perhaps mosey over to owwm.org for input. Aside from scrounging up consumables, I'd rather have that machine than a newer one. For full disclosure, I don't own a jointer, so I can't really make a solid judgement. I just happen to like the old machines. Sent from my iPhone using Tapatalk Quote
rodger. Posted September 12, 2015 Report Posted September 12, 2015 The biggest considerations for me are: FLAT fence and tables, power of the motor (doesn't need to be huge, but anything under 1 HP may be of concern), availability of knives, and length of the tables. Make sure any rust easily cured with WD40 and a 0000 steel wool pad (surface rust). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.