Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

color match:(

Featured Replies

ok here is my problem, its to red after top coat is on. solvent based lacquer, precat.. the rest of the project is ok but the tops are to red or orange.  can get away with what i have but would like to brown up the tops if i could. i thought of toning a top coat with some green behlens to brownup the color some.. any ideas of what i can do would be appreciated,,

140.jpg

  • Author

i was hoping to hear from you and i did make one but what i got on the top wasnt the same the rest of the project came in close. i used a pore filler on the top and it affected the amount of color the top took in on a oil base stain, i think i sanded it to far in grit 180 .. and i am sure more test boards and more complete copy of procedure would have been in order. but i am not a pro and am still in the learning curve.. i had taken and toned some seal coat to get the rest close and they still are.. so i quess i shouldnt have asked this question.. and just remake the top out of some wood. the stain sample isnt as far of as it the pic shows dues to satin sheen vrs a gloss sheen in the camera light.

Strip it and start over. The sample you provide in the picture is lighter in tone. Your projects finish is dark in tone. Spraying a toner will only make you go darker yet and muddy the clarity of the top to the rest of the project.

You can never trust the color samples of  pictures the finish makers provide.   

 

-Ace-

 

  • Author

this was a wooden sample on oak, Mr Ace.. so i thought i was going to be safe.. had taken the time to make sure i had similar toned wood for the project rather than real light wood and dark wood too. as red oak and other woods have different shades of color..  but i still got burned, when the stain hit the wood on the top it came in to red to start with.. thank you for your input.

your original suggestion of toner is the best bet. I have seen articles where people use a pane of glass over the wood and then experiment with toner on the glass to get the color matched before they commit to adding toner to the project. I have never tried this technique but is does seen like it would allow you to experiment with toner colors

other options i know of are more extreme - strip the top and custom match a stain to make it look like the rest of project or build a new top

  • Author

thanks for the help on this question.. it is now done and will be added to the learning experience files..

toned the top coat.  got it close enough for person requesting them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.