Firehawk Posted June 22, 2016 Report Posted June 22, 2016 I have a 36 mm festool hose on my boom arm. I would like a way to use this with both my tracksaw and sanders. Does anyone know of an adapter that works for this? Thanks, Mark Quote
Woodenskye Posted June 22, 2016 Report Posted June 22, 2016 There is an adapter, but it is not available in the US. If you know someone in Europe you could have them send it over. There is away to do it, but you would have to buy a couple hose ends to make the connection work, basically like connecting 2 hoses. Quote
wtnhighlander Posted June 22, 2016 Report Posted June 22, 2016 One of these will probably work: http://m.homedepot.com/b/Plumbing-Pipes-Fittings/Fernco/N-5yc1vZbqpfZ4hs Quote
jussi Posted June 22, 2016 Report Posted June 22, 2016 You can make or buy a whip type extension. I opted to make one by cutting a spare 27mm hose and buying an extra end piece. Bob Marino sells one but as with anything festool, it ain't cheap. https://www.bobmarinosbesttools.com/hose-adapter-27mm-to-36mm/p/HOSEADAPTER/ Quote
rodger. Posted June 22, 2016 Report Posted June 22, 2016 I made one myself. I cut a small section off the smaller diameter hose, bought an extra end, and Viola ! Quote
shaneymack Posted June 22, 2016 Report Posted June 22, 2016 This is a 36mm to 27mm adapter made by Bosch I believe. Works great. Sent from my SM-N910W8 using Tapatalk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.