Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

LED on the cheap

Featured Replies

I have been wanting to upgrade to LED lighting in my shop. The currently lighting was on temporarily installed until I could finish the inside the way I wanted. As I near completion, I have started researching LED lights, and this is what I have came up with being the best bang for the buck. I chose to go with 6000k bulbs, the older my eyes get the better I can see in this range.

The good, bad, and the ugly. 
The good: bulbs last longer, more energy efficient, relatively affordable, super bright, can be retrofitted to existing florescent fixtures, instant on in cold temps, one bulb burns out the other still work, no hazardous materials, no ballast hum.
The bad: Lighting is more directional than the typical fluorescent bulb, initial cost, companies haven't caught on and sell the fixture for LED without the ballast (I now have a pile of new ballasts), There are 2 different ways LED tube lights are wired (one I consider good, the other terrible) I chose the type that have the hot and neutral on different ends. 
The ugly: Since the light is more directional I am going to have to add a few more fixtures in between the existing florescent lights. The energy savings is marginal with LED shop lights, but having to add more will negate the energy savings.
Overall, I will choose to continue adding these in because the lumen at the work area is about 700 lumen brighter which is a huge difference. I won't save much money energy wise, but my aging eyes will be able to see better at only $31.60 per fixture new (2 bulbs and fixture).
Any questions, feel free to ask.

Shoplight1.jpg

Shoplight2.jpg

shoplight3.jpg

shoplight4.jpg

shoplight5.jpg

  • Author

The first pic is a fluorescent light 8ft off the shop floor and the reading taken at workbench (3ft) height.

The second pic is the LED mounted at 9ft of the shop floor and the reading taken at workbench height.

Needless to say, there is quite a difference.

lux1.jpg

lux2.jpg

4 minutes ago, Mark J said:

Curious what the actual "bulbs"  look like. 

This is a link to the bulbs. I hope it works and the pics offered answer your question. I didn't take any pic with them off, as I was too excited to get them burning!

https://www.amazon.com/gp/product/B01ILUMPRG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Hi Rob,  I setup my shop with traditional t8 fluorescent.  4' bulbs, 2 per fixture 6000k.  They are run on about 6' centers booths sides of the room.  Let's were not available when I set it up.  They use 64 watts per fixture and have helped these old eyes immensely.  I would do Let's today if I could find what you are looking for, but I wouldn't expect to save more than nominally. 

Have you compared the fluorescent T5 high output with the LED? I have the T5HO in my shop and have found them to be very bright and at 70, I appreciate the extra light as well.

Sent from my XT1650 using Tapatalk

One nice thing about LED lamps is that they don't degrade over time as much as the florescent lamps. I am slowly converting my shop over.

  • Author
21 hours ago, ormonddmd said:

Have you compared the fluorescent T5 high output with the LED? I have the T5HO in my shop and have found them to be very bright and at 70, I appreciate the extra light as well.

Sent from my XT1650 using Tapatalk

I would love to see a comparison between the T5 and LED. I can't imagine the T5 being anywhere close to the brightness.

3 minutes ago, Robby W said:

One nice thing about LED lamps is that they don't degrade over time as much as the florescent lamps. I am slowly converting my shop over.

Yes, and the instant light is great also.

35 minutes ago, Robby W said:

One nice thing about LED lamps is that they don't degrade over time as much as the florescent lamps. I am slowly converting my shop over.

Actually, LEDs do degrade over time. In fact they generally don't burn out, they just fade away. 

LED life is rated commonly on how many hours it takes to depreciate to 70% of it's original output. At that point it's considered end of life. 70% is the point at which most people will really start to notice that things are getting darker.

Really good LED lighting, like some exterior facade lighting we recently installed on a building, still has 93% at 200,000 hours. Most commercial interior lighting is from 50,000 - 100,000 hours, while screw-in LED lamps that you get at the home center are going to be less than 25,000, with lots being 10,000 hours. If they don't tell you the specifics of lamp life, it's probably pretty low.

Just to clarify: the good ones don't degrade as fast as fluorescents, the bad ones, faster.

Another plus for LEDs at home is that the life is not shortened by frequent switching, like fluorescents. That being said, I put in T8s about 15 years ago & haven't changed one yet. The quality of ballasts has a lot to do with that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.