Ronn W Posted March 3, 2017 Report Posted March 3, 2017 Doing research for the next item on my wish list - a dovetail jig (also must do box joints. This model appeals to me. Appears to be simpler to set up that others. I researched the forum and this questions was asked in 2015 but no one really had any experience with it. The most concerning thing that I have read about it is that, since the jig rides on the router table, the table has to be dead flat. My home made table is within about .007". Close enough? Anyone have any thoughts on this jig? Thanks. Quote
estesbubba Posted March 3, 2017 Report Posted March 3, 2017 I have found Leigh support to be excellent and I would call them and ask how flat your router table has to be. Quote
Janello Posted March 6, 2017 Report Posted March 6, 2017 .007 is flat on any planet except the planets in the flatosphere. That is where Audi's are built. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.