Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

wagner pressure pot ?

Featured Replies

i have used this for some time and it has given me good and bad days, today it was mostly good, but i had troubles on the last round of spraying on  a piece that was to be the most seen piece.. it decided to give me fits. i ended up cleaning the nozzle and re-pressurizing the pot to get it to go and i t seemed to help to move the pot up higher to where i was spraying. at a height of 84"  and the pot was at 36" got maybe 12 ft of air and supply line. the only thing i did notice was the compressor had kicked in during the reprieve to get it going better. i thought i had enough compressor 5 hp 60  gallon and a wall of 1" pipe for cooling and extra air supply.. i am close to pitching this gun and pot and getting a devilbliss if it would stop it, could this be a a bad regulator on the pot causing me grief?

Its been years since I used a pressure pot system. I had a Banks pot and gun then switched to a Devilbis gun. I still had problems like you describe. Years later I had a much cheaper pot and it was hit and miss too. Hoses need to be cleaned immediately after each use. Water & oil separators need to be used and cleaned. Even with having to refill quart cups I love my HVLP system ! American Turbine & a 30 ft hose with Croix gun .

  • Author

well that was good and bad news combined steve:)  now here is the next step in this saga, the best part of the pot is th fact that you dont have to be a contortionist to get into tight corners.. just have gun will travel, now comes the dumb on my part maybe. i have a 4 stage turbine,  but only used it a couple times got it before the compressor showed up ,, bleeder type i think it has cup under it.. most of the time i use a gravity style gun and do fine with them but i had a large amount to do and thought the pot would be the best alternative figured i had the bugs worked out,, so to shorten this up can i get a turbine to work with just a gun and pressure pot some how

It's possible. I think I've seen a pressure pot feeding a HVLP gun but I have no idea if you can make random parts work or if it needs to be a purpose built system . 

  • Author

do you run gravity feed system or pressure feed?

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.