Matter of Fractions Posted June 12, 2017 Report Posted June 12, 2017 I just picked up a Shop Fox W1824 tablesaw from an inventory reduction auction. It's brand new, but no fence. I'm looking for recommendations for a fence that I can bolt on. So far, I've limited it down to about 3 options. The stock standard fence from Grizzly, the upgraded Shop Fox 1720, or the Vega Pro 50. Any thoughts or feedback would be appreciated. Shop Fox 1720 https://smile.amazon.com/dp/B00012XE28/_encoding=UTF8?coliid=I9EM4NE6O45VH&colid=YBGDM0A1RGSN Vega Pro 50 https://smile.amazon.com/dp/B000022622/_encoding=UTF8?coliid=I1Z5P13RH762V&colid=YBGDM0A1RGSN Quote
Just Bob Posted June 12, 2017 Report Posted June 12, 2017 I used the Grizzly fence for years and it did its job, the Shop Fox is Grizzly's retail brand. Some of the parts eventually wore out and I replaced it with the VSCT (Very Super Cool Tools) fence and it is outstanding. Using the extruded aluminum fence allows for quick use of jigs, vs having to rig something for biesemeyer style fences; That is not a huge deal but it is something to consider. Their customer service is outstanding, and it is made in the USA. My son just bought the Vega and seems to like it but I have not seen it in person yet. There have been complaints about the quality control of the Grizzly/Shop Fox/Vega fence faces not being square. That was not my experience, but several people here have had that problem. Quote
gee-dub Posted June 12, 2017 Report Posted June 12, 2017 Both options you show include rails I believe. Is the saw without rails and fence? That will effect the cost of replacement comparisons if cost is a high factor. I can only speak to the actual Beisemeyer, the Saw Stop version and an aluminum extrusion fence. The Beisemeyer lacks a lot of the adjustments that the 'better than Beis' clones have. This was never an issue for me and my Beis is still in use at Dad's and a joy to use whenever I am there. Others have had less pleasant experiences however, once aligned, the saw is not moved and the fence has never required realignment. The Saw Stop version offers more tuning at the fence itself to account for less than perfect rail setup or, less than perfect rails. This is a bit of a misdirection as the alignment will very along imperfect rails as the fence tube is moved to different positions. There will e a lot of opinion here but, taking pains to align well made fence rails removes a lot of the mystery in fence related alignment issues. Poor fence faces is another common complaint. In this respect the Beis is a pain and the Saw Stop offers easy removal of the faces for shimming. The aluminum fence was great. Lightweight, milled true and very adjustable. The only danger here is, once bent, getting an extrusion back to its original form is almost a non-starter for me. My whole fence was anodized and I never had an issue with it. It also lives with a nearby woodworker who continues to enjoy it. Quote
Matter of Fractions Posted June 12, 2017 Author Report Posted June 12, 2017 Yes, I need rails and fence. The options I've looked at so far has been under $350, so I'd like to stay within that. Do you know how much the sawstop rails and fence cost? I've looked but haven't called them. Quote
Woodenskye Posted June 12, 2017 Report Posted June 12, 2017 I have the vega and it is a good fence and went on easy. I did need to drill a hole in the cast iron, but that was simple. I agree that the VSCT fence may be better, but I wasn't aware of it when I bought the vega 40. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.