Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Sealing Sharpie Ink on raw wood

Featured Replies

For my sons wedding we sanded a slab of live edge butternut and had guests sign it with fine point sharpies as the guest register. Now I want to apply a protective finish, that won't cause the ink to run or smear, so he can hang it on a wall. I know that Sharpies are alcohol based. Does anyone have any experience with this? Whatever I do I can test on the backside first. I just prefer not to have to buy a lot of different finish just to test.

  • Author

I should have searched better first, I found a response on a different thread. My bad.

16 hours ago, SLAMDUNKIN said:

I should have searched better first, I found a response on a different thread. My bad.

I normally write with sharpie right on the wood, wait for it to dry, and then spray some water based topcoat on it.

Sharpies are Alcohol based, so don't use an alcohol based finish, and it should work ok. 

21 hours ago, Marmotjr said:

Sharpies are Alcohol based, so don't use an alcohol based finish, and it should work ok. 

I have finished over it with shellac without really thinking about it, and then afterwards was glad it didn't run.  It shouldn't work, as you state, but since the first thoughtless accident I've repeated it many times without ill.  This is mostly touching up where my brand didn't burn in completely, so it may play a role in why it bound enough not to be pulled out by the shellac. 

Also worth considering would be an 'Industrial Sharpie' which are not removable by alcohol.  We use them in the lab sometimes. 

1 hour ago, Gilgaron said:

I have finished over it with shellac without really thinking about it, and then afterwards was glad it didn't run.  It shouldn't work, as you state, but since the first thoughtless accident I've repeated it many times without ill.  This is mostly touching up where my brand didn't burn in completely, so it may play a role in why it bound enough not to be pulled out by the shellac. 

Also worth considering would be an 'Industrial Sharpie' which are not removable by alcohol.  We use them in the lab sometimes. 

I had a marker explode once over a piece of titanium we were working on.  The smooth sections of it wiped right off with alcohol, but the sand blasted areas took a lot of work, as the ink had soaked into it.    I would guess that once the ink soaks into the wood grain a bit, it will take some wiping to get it to run. 

Shop Notes or somebody that I get emails from just sent out a jig for using the branding iron. Where instead of burning it into your project, you burn it into small pieces of wood, like cherry, and glue that to your project. That way, if you screw up, toss it and try another one. Nothing to do with Sharpies but thought that was a good idea

I'll have to look that up; usually I do a light touch up with a sharpie, or if it is too awful I just use a gouge to remove it. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.