Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

shop vac tied into dustcollection

Featured Replies

been a long time since I have been on here been busy with life and all that ect......

I was wondering if can connect a small wall mounted shop vac into miter saw and then feed it somehow  into my dust collection pipes and just have the dust from it go into the piping.  

also can I mount a secondary dust collector onto my run and feed the dust at the end of the pipe farther up the pipe?

In theory it should work.

The shop I was working in had a blower attached to each tool before it ran into the main DC system, but they were there just to help boost the power of the system as it had to run for hundreds of feet in some cases.  But I don't see the need for it in a home shop if your DC system is of the correct power. 

Hey Dan, I don't think there is a "problem" with this but have some considerations. When you collect from the vac, you need to account for the amount of draw your DC will place on it. For example, you might need to drill several holes in the canister so both suction motors are working independently and under the correct load. 

  • Author

I just have my jointer at the end of the line because its only place that I can put it so its out of the way but still have enough room to use when I need it thought to put a small blower at the end to push chips down the line

 

Wouldn't it be easier to just empty the shop vac?  I think I've emptied mine like twice in the last five years...and it wasn't even full, I just did it to clean the filter.  It takes forever to fill a shop vac with miter saw dust.

  • Author

well if its also possible thought to use shop vac for a couple of things one as a miter saw cleaner and second a dedicated shopvac to clean the shop thinking I might mount it in the rafters connect to pipe and remote turn it on and use long hose all though the garage. rather dump one big bag every few weeks then empty my shop vac once a week.

14 minutes ago, duckkisser said:

well if its also possible thought to use shop vac for a couple of things one as a miter saw cleaner and second a dedicated shopvac to clean the shop thinking I might mount it in the rafters connect to pipe and remote turn it on and use long hose all though the garage. rather dump one big bag every few weeks then empty my shop vac once a week.

I use my DC with a DustRight hose and floor cleaning attachment to clean the shop.  It makes faster work of cleanup than a shop-vac.  I use the same hose to hook up to my router table.

If you have an old beater shop-vac laying around, just dedicate it to the miter saw and forget you have it.  I put an old Craftsman under my saw and it's more useful there than it was anywhere else.  I use the CT vac for actual shop work and have another Ridgid for everything else around the house.  Cheap shop-vacs are...cheap.  And they're like routers...you can never have too many. :)

8 hours ago, duckkisser said:

well if its also possible thought to use shop vac for a couple of things one as a miter saw cleaner and second a dedicated shopvac to clean the shop thinking I might mount it in the rafters connect to pipe and remote turn it on and use long hose all though the garage. rather dump one big bag every few weeks then empty my shop vac once a week.

I use a ducted central vac for my miter saw, router table, drill press, drum and oscillating sanders.  Then is it used for all things portable (Festool), and ducted throughout the building for general clean up.  It is hooked to a  dust deputy.  You can find them on CL pretty cheap and the ducting is very reasonable.  Since I added the DD well over a year ago I have emptied the DD once and haven't touched the vac. It hangs on the wall off the floor and out of the way and can be exhausted outside, I just haven't found the need.  The only downside is they use proprietary ducting that you have get from a dealer.  But again the ducting is cheap.  And it really sucks!vac.JPG.caf2d40dfed9b91a8cc9dab8473741f9.JPG

  • Author
20 hours ago, Just Bob said:

I use a ducted central vac for my miter saw, router table, drill press, drum and oscillating sanders.  Then is it used for all things portable (Festool), and ducted throughout the building for general clean up.  It is hooked to a  dust deputy.  You can find them on CL pretty cheap and the ducting is very reasonable.  Since I added the DD well over a year ago I have emptied the DD once and haven't touched the vac. It hangs on the wall off the floor and out of the way and can be exhausted outside, I just haven't found the need.  The only downside is they use proprietary ducting that you have get from a dealer.  But again the ducting is cheap.  And it really sucks!vac.JPG.caf2d40dfed9b91a8cc9dab8473741f9.JPG

how is this compared to a shop vac?

4 hours ago, duckkisser said:

how is this compared to a shop vac?

Since there is no standard that is a hard question to answer.  I installed a central vac in our last house 25yrs ago and it is still going strong.  It is ducted for a 2600sqsft home and is still going strong.  So longevity is not an issue.  The one I have in my shop is rated for a 4200sqft home with over 50' of duct, dust deputy, and the power is amazing.  I have the Festool mini (which has the same motor as the rest of their vacs) and it is not even close to the performance I get from the central vac.  I have a Rigid shop vac that I use to clean our wood stove and pellet stove, and that is even further down the list.  This is all subjective opinion but I will never be without a central vac in my shop.  With the ducting the versatility is unbeatable, and for me, the performance is simply outstanding. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.