Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing Malaysian "Mahogany"

Featured Replies

Hi,

Looking for recommendations on finishing Malaysian "mahogany" decking from Russin Lumber.  It's application will be the ceiling and walls of a 3 season sunroom.  The flooring will be done with Azek composite decking.  The room is fairly well shaded and will be insulated.

There is of course some color variation among the boards, but I'm not set on treating with stain solely for the purpose of achieving better color uniformity.  Have tried doing research and I of course hit on a good number of videos, etc of multi step finishing techniques including using wood fills that would provide an awesome finish on fine furniture.  The product is not yet installed so I may have time to finish prior to installation or afterwards.  Either way there will be plenty of ventilation. 

Found this forum by stumbling on Mike Vee's "Finishing Mahogany - First Time Wood Worker" thread.  Were this you how would you go about finishing it?

I have no idea what that product may actually be. Pictures would help. Is it an enclosed room where temperatures and UV would be the only worries or is it a screened porch that will get some blown in rain?

I'd use a matte or satin wiping varnish like Arm-R-Seal. 2 coats should do it, since it's not going to get heavy wear.

Trying to color match all the variation is something that can take a lot of time & skill to do well, but it can be done. Check out a photo that @Mike posted where he did a great job color matching some sepele boards that were vastly different.

It's probably one of the species that falls under the "lauan" umbrella.  x2 for Arm-R-Seal for ease of use and durability.  It's a pretty open-pored species so I'd use satin to prevent the weird plasticky look that semi-gloss and gloss will have on open-pored species.

  • Author

Wdworker/DrZaius,

 

Thank you for the replies.  I'll get some pics added when I get home from work. 

I think temperature and humidity will be the driving environmental considerations Wdwerker wrt to finishing (there is no vapor barrier or insulating under the deck).  The room is roofed and is on the north side of the house; there is a good canopy around the west and north sides of my property that provide shading so UV radiation should be of minimal consideration for this application.

This is a conversion of a screened /enclosed deck.  All of the screens have been replaced with windows.  The only way rain might blow into the room is if I am  negligent and fail to close all of the windows back up.

  • Author

Pics showing grain and board color variation.  Boards do feel a bit rough Eric.

Deck_Grain1.jpg

Deck_Grain2.jpg

Decking_Color_Variation.jpg

  • Author

Two internal room pics plus looking from outside backyard towards sunroom

Deck1.jpg

Deck2.jpg

External_Sunroom.jpg

Yea that looks like "luan " also known as meranti,  philippine  mahogany, and many other names. Wiping varnish does sound like the safe way to go.

Neat looking house. Where do you live?

  • Author

KC, I live in the King Of Prussia  / Norristown / Valley Forge area which is a northwestern suburb of Philly.  The town next to mine has controlled their development and there are farms within a few miles.  I am on the "poor side" of the river.  Norristown is run down, but there has been some investment there since I moved into the area.  Good amount of deer.  You can see a couple of fauns bedding down in the picture looking out into my backyard.

I see you are from Houston.  I hope things are all right for you.

  • Author

Found a local supplier who had a quart of Arm R Seal satin in stock.  First Coat on a few test boards with a foam brush; may have laid on a little much.  Think I'll try t-shirts tomorrow.  These will go up on the sunroom ceiling so I only sanded these boards with 150 grit paper.

For boards that will go hand-height would you recommend anything different in way of number of coats or fine sanding?

.

FirstCoat.jpg

I do 3-5 coats on furniture, depending on how much abuse it will get.  For walls I wouldn't do more than 3.  Sand between coats with 320 grit.  It's almost impossible to go too heavy on the first coat unless you have a bunch of drips all over the place.  But for subsequent coats - thin, consistent coverage is the name of the game.  I like to dilute my final coat with a dash of mineral spirits...doesn't have to be scientific...just so it stays loose enough to avoid brush marks and streaking and so it self-levels nicely.  It also dries faster so not as much crap settles in the final coat.

  • 2 weeks later...

I sold imported "mahogany" decking for a number of years and also built a number of decks and other projects.  Typically the wood all comes from the various countries.

I would only add FINISH ALL 6 SIDES.  The material does have a tendency to move, cup, warp, swell, etc depending on conditions.  One reason is the nature of the wood, the other is that "kiln dried" means different things in different countries.  

  • Author

Arm-R-Seal really is a very nice product.  Easy to work with and forgiving.  Thanks all for the recommendation.  Personally, I do prefer applying it with cloth.  Going to go through a whole bunch of the stuff.  It is slow going.

SCPDX yes I am seeing some warping already and went back to seal the back faces on boards I had already "done". 

and helps to seal the ends - as that is where most moisture is taken up by boards (more porous than sides and backs)

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.