New guy requesting input on a used tool purchase...


Recommended Posts

Posted

Greetings all! I am new to this fascinating hobby and have been reading a ton of information and watching a lot of videos on various topics. I'm also looking at the possibility of acquiring the tools of the trade. It seems that a planer and/or jointer get used quite a bit and I've managed to come across some listed for sale in my area.

The first is a Rockwell 37-220 6" Jointer for $200. Judging by the pics it's obviously used but seems in good shape. Description says everything works great, (of course), and of course I would give it a good looking over before committing. Is this particular brand/model good? Is the price decent?

There is also a Delta 6" jointer for $250. The pic shows CAT NO: 37-280 so not sure if that's the model or not. It does come on a stand. I've seen Delta mentioned a number of times and it appears it's a good brand, right?

Next up, I've come across someone with a Jet 12" planer for sale for $270. Again, pics show it to be in good shape but I'm not sure on exactly what model it is. Any thoughts on Jet?

 

As a comparison/contrast I have seen a new "out of the box" DeWalt 12" 734 planer for $400 and have heard good things about it, as well as it's bigger brother, the 735.

 

I would appreciate any input and guidance from you guys. Thanks in advance!

Posted

Welcome to the forums.

Good way to start, you need these to tools to get you material flat and square which is where it all begins. 

I can't really speak to the price of the two jointers but, one thing you'll need to do a little research on is the availability of parts for machines of that age.  They may look nice and run but then the thing starts to give you problems and you could end up falling down the ol' $$$ rabbit hole.  Grizzly tools has two 6 inch jointers that are between $500 and $600 and at least there you are starting out with a warrantee'd tool.  Grizzly isn't top of the line but it can be a good way to go if you are new.

All I know about Jet is they get mixed reviews with their power tools  and you will probably find more members here own the Dewalt 735 Planer then any other, myself included.  It has a lot of value for the money spent and would get you well on your way in that department.

 

Posted

The Rockwell jointer is pretty well thought of amongst older machines. It is likely about 40 years old and like any machine more than 10 years old you should be prepared to replace the bearings. That is not difficult or expensive. At 200 it's a fair price for a 6" machine. The delta is newer but I believe that model has an aluminum fence. That style of jointer is not thought well of and I personally would not consider it a viable option. 

If you buy an older machine like the Rockwell check out the forum for old wood working machines, owwm.org

I got into wood working through buying older and this much cheaper machines. It saved me thousands of dollars over the years, but it did mean I had to do some work on the machine s as I purchased them such as replacing bearings etc. 

What machines you buy is going to be largely dictated by what you plan to build. What is your first project going to be? Do you have a table saw? Before anything else that is probably the most important tool if planning to make things that has corners. 

Posted

Thanks for the replies gents! I have access to a table saw and a miter saw. My step dad has them and they are available to me whenever I need them. 

I do plan to start out small to be honest. The obligatory cutting board and picture frames then moving up from there. I've seen a couple of faith based items I'd like to make for my folks and also to hang in our house. 

After doing a bit more digging it appears the jet is an older model, the blue one, (jwb-12 I think),with the adjustment handle on the side as opposed to the top. I think for just a couple hundred dollars more I will go with the Dewalt instead. It would be brand new and has more features when compared to the older machines.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 33 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined