Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Epoxy strength on mallet handle

Featured Replies

I'm making a few mallets out of some scrap I have laying around. I have piece of walnut that would be perfect for the handle. It looks like it either had a loose knot that fell out or some rot, or maybe both. I was wondering if I fill the large void with west system epoxy, will it be strong enough to hold up to the abuse a mallet will encounter. Photos of the wood attatched. 

IMG_6588.JPG

IMG_6589.JPG

I wouldn't think so there is very little structure in the knot area epoxy would not make a good handle if you formed it into a solid handle so in my opinion, epoxy wouldn't strengthen an already weak structure in that knot area.

Check cremona and dema's videos on the mallets dema makes. He has something that he uses to fill voids like that. Could try emailing them if you can't find it.

  • Author
15 minutes ago, Chestnut said:

Check cremona and dema's videos on the mallets dema makes. He has something that he uses to fill voids like that. Could try emailing them if you can't find it.

They do a different process that I don't think I want to get involved with. But that's a good idea thanks 

1 hour ago, Matt Truiano said:

They do a different process that I don't think I want to get involved with. But that's a good idea thanks 

They do a resin for punky wood but there is an epoxy i thought for the large voids. If you check the brass shavings hammer vid he uses ecopoxy.

So if you look at west systems properties page their epoxy isn't much different than wood the tensile strength and flexural strength is similar but the flexural modulus is slightly lower indicating that it will snap instead of bend. This is assuming there isn't that small strip connecting top and bottom.

The intent of the mallet is somewhat important. Are you going to be driving steel stakes in hard ground or doing joinery? If it's the latter your going to be more than fine. Though you will probably want to use 207 and a vacuum chamber to remove bubbles or use a casting epoxy.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.