Jfitz Posted March 10, 2019 Report Posted March 10, 2019 I'm having some weird issues with a thermostat and/or my relay control box for my (baseboard hot water) heating system. I submitted an online question to the company but thought I'd ask here if I can bounce some questions off someone ... Quote
Tom King Posted March 10, 2019 Report Posted March 10, 2019 Thermostats do play out. Make sure any fuse in the system is taken out before switching wires. I don't know anything about your boiler, but air handlers have a fuse, that's not obvious, that if you don't take it out, will need to be replaced after fumbling with the thermostat wires. 1 Quote
Jfitz Posted March 10, 2019 Author Report Posted March 10, 2019 Thanks Tom - I jthink I figured it out, and just came back to cancel the call for help It looks like the fuse in the control box is gone (or "mostly" gone). Visually it seemed OK until I took a closer look at it, and then threw a multimeter on it. What's weird is that the box works "some" - the power LED is on, and if one of the other zones calls for heat it turns on the circulator pump. Quote
Tom King Posted March 10, 2019 Report Posted March 10, 2019 I've seen similar, once before on a gas pack. I was thinking it was just a bad connection, so cleaned the contacts, and put in a new fuse. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.