Recommended Posts

Posted

Hi everybody, I'm Cesar and from Parla, a city near Madrid in Spain.

I would love to work with wood, but here in Spain it's difficult because the space in our flat is very limited (80m² about 860ft²) and no garage, so I could define myself as a frustrated woodworker.

But I'm trying to form a Fablab (http://en.wikipedia.org/wiki/Fab_lab) in Madrid. One of the first projects will be the construction of a CNC Dremel from scratch.

It should be less than 300€ about 400$ (the CNC part) and should be entirely made from simple materials (MDF, screw, cabinet rails,...) and power tools like drills or jigsaws.

Recently researching woodworking techniques to use in this project, I found the videos of Marc and like them very much, so here I'm ;-D

Cesar

Posted

Hi everybody, I'm Cesar and from Parla, a city near Madrid in Spain.

I would love to work with wood, but here in Spain it's difficult because the space in our flat is very limited (80m² about 860ft²) and no garage, so I could define myself as a frustrated woodworker.

But I'm trying to form a Fablab (http://en.wikipedia.org/wiki/Fab_lab) in Madrid. One of the first projects will be the construction of a CNC Dremel from scratch.

It should be less than 300€ about 400$ (the CNC part) and should be entirely made from simple materials (MDF, screw, cabinet rails,...) and power tools like drills or jigsaws.

Recently researching woodworking techniques to use in this project, I found the videos of Marc and like them very much, so here I'm ;-D

Cesar

Welcome Cesar. I hope you can find some space to work!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.