Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Refinishing an Anco Bilt Drafting Table: Thoughts and Suggestions for a Beginner?

Featured Replies

Last year I was fortunate enough to come across an Anco Bilt drafting table for $20 at a church rummage sale. (I've only ever dreamed of using one of these for my illustration, so happy birthday to me!) Now with so much time on my hands, I figured it was time to start refinishing it. Now, even from my untrained eye, I can tell it needs some TLC - the frame and hardware seem in very clean condition, but the table top panel has seen some neglect. It's riddled with discolorations, pencil grooves (whoever was tracing/cutting seemed very heavy handed) and what I can only assume are cigarette burn marks along the main working area. 

Due to these numerous imperfections, I'm not terribly worried about a resale value. My first thought, now that I'm almost done sanding it, is to stain it just enough to soften the burn marks and add a durable finish. The real trick is figuring out which direction is best for a beginner without a wood shop or garage! Any suggestions or advice would be appreciated, thanks!

(Photo shows original finish on the table before sanding.)

AncoBiltTable.jpg

Several options are available. Simple shellac is easy to apply, and won't stink the house up. Some wipe-on polyurathanes have a low VOC & odor, so can be applied indoors without much offense. Water-borne finishes are certainly a good choice. It really shouldn't matter, much. A proper drafting table needs a drafting mat for best performance, anyway.

I wouldn't bother with stain. Sand to 220 grit, add your finish, it'll mellow out over time and if you use a drafting mat as @wtnhighlander said, you'll only see the outside edges.

I would not stain it.  Drafting boards wer mad of stable wood and usually a softer species.  I think that stain will blotch. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.