Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Rehandling Japanese Oire Nomi II

Featured Replies

  • Popular Post

About 10 years or so ago, I was fortunate enough to purchase a set of Kiyohisa slicks from the maker, Watanabe Kiyoe, through So Yamashita (Japan-Tool.com). These have been incredible chisels and a joy to use when building furniture. As much art as tool.

Part of the motivation for this thread comes from the completion of the underbench cabinet. Here are the Kiyohisa slicks in a drawer (beginnings of fitting tools into the drawers) ...

KK8.jpg

Of course, over the years, I wished I have been able to order a set of Kiyohisa oire nomi (bench chisels). Not only were these very expensive several years ago, plus there was a wait list of several years, but Watanabe is no longer making chisels owing to ill health. The price of his tools has rocketed.

Over time I have managed to put together a collection of Kiyohisa oire nomi purchased individually. Hence the range of handles, below ...

KK3.jpg

Handles and wood for handles

My plan was to change the handles - creating a unified appearance - but first I needed to find a suitable wood. The woods for Japanese oire nomi was discussed recently. Japanese White- or Red Oak is not available in Australia, and I really did not wish to use something that looked different. There are a number of Australian hardwoods that are suitable for chisel handles generally, but not in keeping with the look I wished to preserve. One choice I had was Beech (courtesy of an old jack plane).

Kiyohisa1.jpg

(My iPhone camera seems to skew the hoops)

This is a nice look with excellent mechanical properties, and a gentle colour and grain. However, it did not quite lend itself to the colour and figure I was seeking to reproduce. I had already tried US White Oak, but found it too coarse grained.

In the end I plumped for Tasmanian Blue Gum, also known as Southern Blue Gum …

The colour of southern blue gum timber ranges from pale straw to brown, often with blue, green or grey tinges. Regrowth material can exhibit shades of pink. Sapwood is somewhat paler than the heartwood, but not always clearly demarcated. Growth rings are prominent on end sections. Grain is often interlocked with a medium and relatively even texture.

https://www.woodsolutions.com.au/wood-species/gum-southern-blue

With careful selection, it was possible to find sections with straightish grain and just a little – almost unnoticeable - grey-blue tinge here-and-there. I think that it did a good job of resembling Japanese White Oak in colour …

First Modification

The other factor was that I wanted to make the handles a little thicker, which would better fit my larger-than-average size hand. The typical oire nomi is 20mm across. I planned to make these 22-23mm across.

Second Modification

The wider handles led to a second modification, which involves setting the hoops differently. The ends of the handle were rebated on the lathe …

KK4.jpg

As a result of this, the hoops sit flatter on the handle. The two on the left are modified, and the two on the right are standard …

KK6.jpg

I like this effect. The handles are more comfortable to hold.

Each chisel was friction-sealed in buffing oil on the lathe, and then finished in Ubeaut Hard White Shellac.

So, seven chisels in all. Seven new handles. Here is the completed set (30mm down to 3mm) …

KK7.jpg

Nothing fitted yet. Just planning ...

KK9.jpg

Regards from Perth

Derek

Rebuilding a Kiyohisa Oire Nomi: http://www.inthewoodshop.com/ToolRestorations/KiyohisaRebuild2.html

Beautiful sets and a great job on the handles. Will replacing the handles diminish the value or is that not a concern? Probably comfort and use is more important? 

  • Author

Coop, the "collectibility" of the chisels is not a big concern. However, I imagine that a matched "set" would be more desirable than a hodge podge, at least for some.

Regards from Perth

Derek 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.