Popular Post gee-dub Posted November 25, 2021 Popular Post Report Share Posted November 25, 2021 I thought I posted this way-back-when under one of my "Random Tips" rambles I get on now and then but cannot find it. This was just going to be a "hey I made some more of these" thread but just in case I really didn't post them before, here goes . . . You dig through the scrap bin and find a small panel and some scrap that can be cut into a triangle profile as shown. Glue the triangle strip on one edge or on both edges if your panel is large enough. I end up with an item that is about 7" long when completely done. Slice it into 1-1/4" wide strips on the table saw. Cut those strips in half and add a hole to hang or string them on when not in use. Cut some abrasive strips. I use 400 grit but anything down to about 220 is fine. Once you get coarser than that you risk damaging the frame part surfaces. Stick the abrasive strips onto the thing-a-ma-bobs. And you use them like so. I had a batch of these but cannot find them post-move (yet) and so whipped up another batch this morning. 5 1 Quote Link to comment Share on other sites More sharing options...
Ronn W Posted November 26, 2021 Report Share Posted November 26, 2021 So, do you glue 1 corner at a time? LI can picture gluing all 4 corners at the somae time only if the " assista are juts the right size. Quote Link to comment Share on other sites More sharing options...
gee-dub Posted November 26, 2021 Author Report Share Posted November 26, 2021 I glue two “L’s” and then glue them together. I have greater success this way than clamping all four corners at once. It takes a little more time but greatly reduces my error rate:) 1 Quote Link to comment Share on other sites More sharing options...
Dave H Posted November 27, 2021 Report Share Posted November 27, 2021 I like it easy fix. It seems I remember some company or other that made a similar product for a ridiculous price! Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.