B. Brinkley Posted July 5, 2022 Report Share Posted July 5, 2022 Hello all, For several years I have owned this lathe that I found at a yard sale. I know it's a Craftsman, but I suspect it my be a re-badged Walker Turner maybe. I have not found much info on it so anything would be appreciated. It has a 3/4"-16 headstock and M1 tapers. I added the motor as it came without when I found it. I know it's not much of a lathe, but I would like to get into small bowl turning and such to see if I enjoy it. Any tips on using this little lathe would be much appreciated! Thanks! 1 Quote Link to comment Share on other sites More sharing options...
wtnhighlander Posted July 5, 2022 Report Share Posted July 5, 2022 All I can tell you about the lathe is that you about to follow it down a deep rabbit hole. Turning is very addictive! Quote Link to comment Share on other sites More sharing options...
B. Brinkley Posted July 5, 2022 Author Report Share Posted July 5, 2022 I found out this morning that it is an Atlas lathe made in the early Thirties. I would have never guessed it to be around 90 years old! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.