Recommended Posts

Posted

I'm looking to upgrade the rusty Stanley chisels I have. Any good recommendations for under $100 maybe? I know a guy's generally gonna get what he pays for, but I guess you could say I'm still feeling the waters on the wood working stuff. Currently they'd be used for general pearing, cleaning mortises, and dovetails.

Thanks for the help!

Aaron

Posted

On thing that may help stretch the $100 is to decide which sizes you use 90% of the time (likely a very small number) and just get those. If you need a size you don't have in the better chisels, you could use the Stanleys.

The Narex chisels are good for the money. I've read that the new Stanley Sweetheart chisels are good. Charles Neil uses Woodriver chisels; he's sponsored by Woodcraft, but when I see them go through wood so easily on video, proof is there.

Posted

I went through much the same thing not too long ago, looking to replace some

old Stanleys. I finally went with the Bahco 1031 series and bought some of the

more common sizes (per Paul-M's suggestion).

So far they're doing great and I'm very happy. Edge retention is a lot better

than I expected.

Although I'm not a big fan of plastic handles, these Bahcos are the exception.

Only nitpick is that the bevelled sides don't come down as thin as, say, LN chisels.

Posted

Although I've only been using them for less than a month, I'm really pleased with the Narex set I bought. I think something similar is available from Lee Valley.

I didn't go mad about flattening the backs - I just honed the last 20mm or so. I'm a complete beginner, but they slice through beech cross grain without you working up a sweat.

Just watch the bevelled edges, they'll cut you just as well as the business end. Plasters were not included in the set.sad.gif

John

Posted

I have an old set of Marples and one new one since Irwin bought them. Big difference in how well they hold an edge. I love the Marples for what they are. They work well.

Posted

I recommend getting the four major sizes you need from Ashley Iles. The four I recommend are 1/4", 3/8", 1/2" and 3/4". Excellent high carbon steel that will hold and edge. There Mark-II chisels which have been out for two or three years now have an extremely thin edge on the bevel side. You can find them at Tools for Working Wood.

Posted

how old are the stanleys? they used to make great tools. If they are made before the 1970s I would say time and money would be better spend on de-rusting and cleaning them for use.

Posted

Sorry. Should have clarified how old they were. These Stanley's are walmart specials from about 5 years ago or so. They shouldn't be rusty after such a short life, but anything in my barn rusts pretty fast. Very frustrating. I'm in the process of fixing that by walling in a 30 x 18 area for the shop. I'll throw in a good de-humidifier and hopefully that will fix the problem. Constantly cleaning the surface rust off the tables of the bandsaw and table saw get old real quick.

Posted

I go to garage sales and second hand stores. Amazing what some folks will part with for little money specially if they don't know what something is. I picked up a 1 1/2" mortising chisel for 50 cents Got a new handle turned for it, Sharpened and cleaned it up a bit and it is the Cadillac of my collection of good chisels. If you know what you are looking for you can find some real gems I have.

Posted

I go to garage sales and second hand stores. Amazing what some folks will part with for little money specially if they don't know what something is. I picked up a 1 1/2" mortising chisel for 50 cents Got a new handle turned for it, Sharpened and cleaned it up a bit and it is the Cadillac of my collection of good chisels. If you know what you are looking for you can find some real gems I have.

Joe,

You are right. I got a set of older Stanley's that way. I think I dropped 2 bucks for the set. They weren't in too bad of shape to start with either.

Posted

I go to garage sales and second hand stores. Amazing what some folks will part with for little money specially if they don't know what something is. I picked up a 1 1/2" mortising chisel for 50 cents Got a new handle turned for it, Sharpened and cleaned it up a bit and it is the Cadillac of my collection of good chisels. If you know what you are looking for you can find some real gems I have.

I also check flea markets. It used to be easier, before I started working weekends, but I found a couple of calipers for under two bucks, and a (used) file card for seventy five cents, that have been very useful for me. I found the better time, at the one flea market I really enjoyed going to, was spring and early summer, as people finally got the basements and garages cleaned out. Your area might be different.

Check out estate sales, too. if you show up early enough, you might be able to snag larger quantities / collections before they get broken up. (I went to one where there were four tools left of the guy's collection, but there was still some scraps of wood available for under $5 for the bundle. If I could have afforded the Harley, I would have purchased that, too.)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 40 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Lenny2
    Newest Member
    Lenny2
    Joined