Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Little Shop of Horrors

Featured Replies

  • Popular Post

A few folks here wanted to know more about my "shop," so here it is (I'm sorry in advance).

On the front face, I have my drills and jigsaw. Those trays at the bottom are for my diamond sharpening stones, drill bits, mini saw blades, measuring tapes, and some random stuff.

20260917_165430.thumb.jpg.a74f2bf95ed36db92e30eacb67b4f7a3.jpg

On one side, I have attached a T-track system for my work lamp, a Dremel, and a utility tray. Also on this side are my recently acquired Bosch mini circular saw (I absolutely love it), a handheld vac, hammers, and more. I keep a basic multimeter there too. Right at the bottom is my air compressor.

20260917_165516.thumb.jpg.69ff5544e8a62a8878487ad16189607d.jpg

On the back are my Japanese saws, a drill guide (Milescraft), a couple of small vises, some clamps, and more miscellaneous gear.

20260917_165207.thumb.jpg.1e6ae3cc6f4fd1f687adcb9360835128.jpg

Finally, on the other side, there is a drawer for general-purpose tools, screwdrivers, and a large hand saw. I have my bench grinder down there too, but that's just temporary. The metalworking vise usually sits in that spot when not in use.

20260917_165343.thumb.jpg.4cab23ccd9019a0f15f0d025760c7277.jpg

When I do use it, the metalworking vise is mounted on a piece of MDF which is secured to the workbench by two threaded inserts and large hand knobs. The setup creates so much friction that the vise doesn’t budge at all during "normal" use, yet it’s quick and easy to remove and put away when I need to clear the bench. I have replaced the jaw plates with homemade wooden ones and I use it a lot, even for woodworking tasks.

20260917_170721.thumb.jpg.33d218961fa660172ae54174e803a4a4.jpg

I also keep a portable workbench (Keter) right next to my main one. It is very sturdy and can easily handle the weight of my tool chest whenever I need full access to the main bench. Additionally, I have a stack of Milwaukee Packouts for consumables and power tools that I don't use very often.

I keep my stationary tools (bandsaw, miter saw, drill press, router table, etc.) in my storage cage on the top floor of my building. It's been a while since I used them, and I probably should sell them. I'm focusing on small projects I can handle without them. I have to keep it real.

The rest of the tools are everywhere around the apartment :)

 

I used the pee-wad out of a Keter foldable bench / work surface.  Man that thing was work horse.  It was still fine when I gave it away after years of use.  You have two Lie-Nielsen block planes???  You're as bad as I am. :D

  • Author
On 9/17/2026 at 7:59 PM, gee-dub said:

I used the pee-wad out of a Keter foldable bench / work surface.  Man that thing was work horse.  It was still fine when I gave it away after years of use.  You have two Lie-Nielsen block planes???  You're as bad as I am. :D

3 actually :D

20260917_202406.thumb.jpg.2aad2795b6e5dcf8ff19bc39e34c8cda.jpg

:D You rock.  I love the little "apron" plane.  Mine happens to be a Veritas but serves the same purpose.  So handy and so easy to maneuver.

 

On 9/17/2026 at 6:26 PM, gee-dub said:

:D You rock.  I love the little "apron" plane.  Mine happens to be a Veritas but serves the same purpose.  So handy and so easy to maneuver.

 

Couldn't agree more. I use my little apron block plane probably 95% of the time, while its big brother looks on from the shelf in disgust.  Fits in the hand so nicely and just a joy to use. 

  • Author

Nice looking planes!

I remember that when I started buying the nice stuff, about a decade ago, I tried LV first. For some unknown reason my Amex credit card was declined, which was really odd since that card was my number one choice on every other site. So I cancelled the order and switched to LN.

Yeah, both Lee Valley and Lie Nielsen make wonderful products.  Both provide amazing customer service.  Can't say enough good about either of them.

Back in 2005 I was at a woodworking show and Lee Valley and Lie Nielsen were kitty-corner from each other on one of the main walkways through the show.  I was just graduating from "plane shaped objects" to actual planes. 

I almost drove my dad nuts walking back and forth, back and forth, between the booths.  For whatever reason I landed on the Lee Valley line and have been very happy.  The Lie Nielsen stuff was just as good and it was really splitting hairs and I can't honestly remember why I landed on one side of the fence or the other.

Be that as it may; all wonderful tools made by those that know how to make 'em and support service after the sale the way it ought-a be done. Kudos to both outfits from me!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.