Wardo Posted October 4 Report Posted October 4 I have a craftsman table saw model # 315.288390. I’m looking for a replacement motor. Can anyone help with recommendations? 1 Quote
Popular Post gee-dub Posted October 4 Popular Post Report Posted October 4 It looks like a standard clockwise motor. I have bought trashed contractor saws on the cheap, removed the motor, and tossed the saw. This was cheaper than buying a motor. 4 Quote
JustAnotherGuy Posted October 16 Report Posted October 16 That is going to be a tough search! Let us know where you get it. 1 Quote
Biotec Posted November 4 Report Posted November 4 @Wardo Have you had any luck trying to find the one half horsepower motor for your saw? Are you sure you're getting power to the motor? Have you checked the start and run capacitors? On average this motor sales used for $180 USA. The on off switch is the greatest culprit for the motor not running but if it comes it doesn't run but hums, it me think start and run capacitors. Craftsman 315 10" Table Saw 1.5, 1-1/2 HP Motor, 979931-001, 315.228310 Online manual list this part number 979931-001 For it. Sears sold it as a 1, 1/2 horsepower motor 5/8 shaft size 3400 RPM. More trivia from online Substitute Motor Specifications Needed Horsepower (HP): 1.5 HP (or 1 HP to 2 HP depending on your workload) Speed (RPM): 3450 RPM (crucial to match blade speed/pulley ratio) Voltage: 115V (or dual-voltage 115V/230V wired for 115V) org for usa Shaft Size: 5/8-inch keyed shaft (to fit your existing saw pulley) Frame / Mount Style: NEMA 56 or 56C frame style, or an aftermarket/salvaged motor mount compatible with Craftsman 315-series saw Rotation: Clockwise (CW) when looking directly at the rear/back of the motor (or Counter-Clockwise (CCW) if looking directly at the shaft, depending on how your pulley/belt system transfers power). Not all the motors use this exact wiring diagram Use it for reference only. When taking the motor cover off take pictures well enough to know to identify which terminals are attached to where. For Clockwise (CW) Rotation (Looking at the Shaft) To reverse the direction of a standard replacement motor, you typically swap the Red and Black internal wires: Line 1 (Hot/Black from power switch): Connect to Terminal 1 (paired with the internal Red motor wire). Line 2 (Neutral/White from power switch): Connect to Terminal 4 (paired with the internal White and Yellow motor wires). Insulate Together (Tape/Nut): Tie the internal Black and Blue motor wires together. Note: Always verify your specific replacement motor's connections using the schematic printed directly on its nameplate label or inside the terminal junction box, as wire coloring can occasionally vary by manufacturer. Other online trivia The Craftsman "315" model prefix indicates tools manufactured primarily by Ryobi (Ryobi Motor Products / Techtronic Industries / TTI), Made approximately 2002 mid year for 4 years slight model number changes overtime. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.