Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

MDF

Featured Replies

I personally can't stand the stuff, but I see many respectable woodworkers use it. I realize times are hard, but can someone help me decide when using the stuff is acceptable because I just don't see it.

I often use MDF. I use it when I need a painted piece as you can get a very fine finish on it. I do use the Moisture resistant stuff which is slightly denser than the 'normal fluffy' stuff. I basically make boxes with biscuit joints and then use wood for the high use areas like face frames or where butt hinges will be used. I get a lot of customers wanting painted furniture so this is the ideal medium for me.

Hi Patrick. I don't like MDF IF it is used without the proper precautions. My assembly table has 2 sheets of 3/4" MDF as the surface and base, but the surface has been treated with bees wax. The following picture is of the top of the assembly table and also one of my home made track saw guides, both MDF and treated with bees wax.

I use the stuff because it is reasonably stable if kept in a constant moisture/ humidity environment.

Hey, if it's good enough for festool to use it on their MFT3, it's good enough for my workshop.

It does give a very good painted finish as well, almost glass like. Here is a picture of a few of my tracks made from 6mm (1/4") MDF. I love them.

And one more pic...

Nearly forgot the most important picture! I ALWAYS wear this when working with MDF!

It's good for jigs and specially for painting...

The powder is very thin and goes EVERYWHERE (including lungs if you don't wear a respirator) so i work with it only outdoor...

I don't like the stuff much either but it has it's uses. I do use it for jigs and as substrate from some of my marquetry panels. I'll also use it for my bench top and some shelving.

What pushed me over the edge is stability and cost. Properly support the stuff never moves and do this experiment: go to the lumber yard and price a nice full sheet of say Baltic birch. Then price the same size MDF sheet. Look at your budget.

My truck got filled with MDF. sigh...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.