The Finnish Guy Posted October 16, 2011 Report Posted October 16, 2011 Found these 2 (plus an old saw and a axe) from an old building that we were clearing up from stuff, wich is going to be demolished / burned down. Now, these tools are old, maybe 30-40 years? The hand plane is just huge, its really long in lenght. And the other one, that i dont even know what to call it, is just stunning aswell. Its been made really nicely, but i just dont what it has been used for? The springs and everything are made from wood! Here's the pictures: http://s1122.photobucket.com/albums/l538/MarkusFIN/Old%20tools/ Quote
rmac Posted October 16, 2011 Report Posted October 16, 2011 30 years ago was 1981. Those tools have to be much older than that! -- Russ Quote
The Finnish Guy Posted October 16, 2011 Author Report Posted October 16, 2011 Woops i posted this on the wrong place! Hope that's ok! Yeah well i dont have no idea how old they are.. Quote
Onboard Posted October 16, 2011 Report Posted October 16, 2011 Welcome to Wood Talk Online. This would be a good post for the Neanderthal Village sub-forum. They can tell you a lot more about your tools. For now, I can say that the long plane looks a jointer plane (maybe a fore plane). The other plane is a plow plane (or plough plane if you're English). It’s used for cutting (or plowing) grooves inside the edge of a board. The adjustable fence will allow you to set how far from the edge the groove is plowed. If you loosen the wing nut on the side, you can pull or push on the metal “tab” on top which will allow you to adjust the metal foot next to the blade to adjust the depth of cut. The metal “skate” rides in the groove being cut. Some of the folks in the Neanderthal Village sub-forum can probably give you an approximate age as well. I'm sure they can also correct any errors in my attempt to explain the plow plane. Quote
duckkisser Posted October 17, 2011 Report Posted October 17, 2011 dont know what it is but im guessing its something for the edge since it has a guide along one side of it. Quote
Jonathryn Posted October 17, 2011 Report Posted October 17, 2011 I would guess your plow plane is very old, like 18th or early 19th century, but I'm not an expert at dating them. In order to use it you need a set of irons to make grooves and dados at the widths you want. It looks very well made. Quote
jwatson Posted October 18, 2011 Report Posted October 18, 2011 i believe the threaded fence like it has was a more expensive version, being the cheaper model was usually wedged. thats a nice find. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.