Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Chest for Mom - Completed Just in Time for Xmas

Featured Replies

Posted this to SMC earlier today - figured I'd post it here too....

Well, I finally finished this jewelry chest for my mother. I started this thing probably 6-8 mos ago, and if I had to guess, I'd say it has at least 150 hours in it (I am a slooooow woodworker). A lot of the time was spent learning certain things as I went and also on design considerations - the first time I do any given type of project it takes an extra long time. Anyway it's done. I do not have any molding planes so the moldings were shaped on a router, but other then that the build was entirely hand tool. I previously posted some build pics part way through the project so I'm not going go into detail about the build at the moment. I will say that the great feedback I received on the feet from some folks on SMC that was very helpful in ultimately getting the design of the feet looking right.

The chest is about 14.5"W x 17.5"H X 7.5"D. Case is cherry, drawer fronts are spalted QS sycamore, back and drawer sides are soft maple, and other interior/secondary components are poplar. Knobs are these small turned knobs from Lee Valley, 9/16" diameter. After smooth planing, sanded up to 600 (to minimize potential for blotch), applied a thin coat of BLO, padded on several very thin coats of dewaxed shellac,then applied wax with steel wool and buffed out (a la Jeff Jewitt FWW #112 & #186).

I wasn't sure how the sycamore and cherry would look together or if I'd be able to get the feet to look right, but I'm really happy with both the design and execution, and I love the finish. As always, it has it's imperfections and things I would do differently, but there is nothing glaring at me as a faux pas everytime I look at it (that's a first).

I showed it some folks at work earlier this week and received the ultimate non-woodworker compliment from several colleagues rolleyes.gif. "Wow, that looks like it came from a store." That one always makes me laugh....

Happy do be done with it, and ready to move on to other projects.

Questions and criticisms are welcome! It's the only way I'll get better....

post-4431-0-93495100-1323050607_thumb.jp

post-4431-0-99784400-1323050710_thumb.jp

Awesome job, I really like those woods together. From the first photo I thought it was a full chest but then I read your dimensions, great job.

  • Author

Thanks Ryan! After making the small one, I do have an itch to make a full size chest of some kind... Maybe with fewer drawers though.

There's no limit to what we will do for our Mom's and this work is a prime example. Well done!

  • Author

Did you want to do it with hand tools only or is that just what you have to work with?

A little of both - I have a few portable power tools - router in a small router table, dewalt jobsite table saw - but to use them I need to set them up outside, since my shop in just a workbench in the corner of the house. It just makes more sense for me to do this stuff by hand. I did, however, want to do this entire project by hand, it's fun to work that way and you learn A LOT in the process. Someday when I have a real shop I will probably add a thickness planer and a bandsaw to speed up the grunt work, but for the most part I believe I will always prefer to work mostly by hand.

i would be very proud to give that to my mom. i love the knobs you picked.

congratulations!

  • 2 weeks later...
  • Author

Thanks for the complements guys. I am happy to say the I shipped the chest north last week and UPS managed to deliver all the way up to Minnesota unharmed.. Finally i can EXHALE..... I'm flying north next week and will get to be there when she opens it which should be quite fun.

  • 2 weeks later...
  • Author

That came out really nice! Do you mind if I ask for details on how you made the moldings?

Thanks!

The moldings were the one part of the project that was done with a power tool. They were shaped on router using a simple 1/2 radius coving bit. I then ripped them with a handsaw from a larger board, cut the miters to rough length, then fit them with and brought them down to final length on a shooting board. The front moldings are glued directly to the carcass. The side moldings on the top are glued at the miter and a couple inches towards the front front, but the secured with nails towards the back to allow for wood movement. The lower side moldings didn't need any nails since they were glued to a base that had the grain running in the same direction as the moldings. The base they are glued to is screwed into the bottom of the case through elongated holes to allow for wood movement.

Hope that answers your questions. But if not, by all means, ask away....

superbly answered thank you. I'm in the planning stages of something similar and on the hunt for ideas/techniques to try. Actually it's a small chest for kitchen knives but same basic concept. Thank you for the reply and again, awesome job I'm sure you're mother will really enjoy it and cherish it for many years.

Awesome job. That will be a chest that will stay in the family for years to come. Love the details in making the draws.

  • Author

Thanks again for the compliments. I got to give it to her this past weekend. It was really fun to see it in its final location on top of Mom's dresser. Happy Holidays!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.