dwisnoskie Posted January 7, 2012 Report Posted January 7, 2012 I'm new at this and looking for some advise on where to learn the tricks of the trade. Any guidance would be appreciated. Thank you Daniel Quote
rmac Posted January 7, 2012 Report Posted January 7, 2012 The only place to REALLY learn the tricks of the trade is in your shop. Go build something. Make mistakes. Have fun. -- Russ Quote
Texfire Posted January 7, 2012 Report Posted January 7, 2012 Wow, that's a little open ended. Okay, here goes... Keep your ears open, eyes protected and watch where your hands are when around machinery. Keep your mind open to new ideas, but don't dismiss the old ideas out of hand, they became the way things were done because they got the job done just fine. The New Hotness rarely seems to replace experience and good skills, but a good education will keep you from repeating mistakes others have made. Listen to the old woodworker, they've made the mistakes you'd like to avoid. Don't take safety advice from someone without a full number of digits unless it's advice for more safety. The internet is a wonderful resource for information, some of it dead wrong. Take everything with a grain of salt and filter advice gained there through your own experience. Try to buy a tool once, quality is worth waiting for. You will mess this up anyway, forgive yourself and learn from it. Read as much as you can, and make plans, but don't let too much information paralyze you into indecision. Make sawdust joyfully. Woodworking is a disease, pass it on to the next generation. Quote
RenaissanceWW Posted January 10, 2012 Report Posted January 10, 2012 I think you have already found the right place. Best forum around with very friendly people. Think about what you want to build and then start asking questions. Stepping into a new world can be daunting but if you have a specific project or two in mind then you can narrow the stream a bit and that will help. Ask away here and you will get more opinions and help than you can process. Welcome! Quote
Bill Palmer Posted January 10, 2012 Report Posted January 10, 2012 There is really no tricks of the trade they are learned skills by observation and practice and more practice. There is many ways to accomplish a woodworking task, some with power tools and some with hand tools. Woodworking always involves some sort of cutting of material with hand tools or power tools, always think through each task. Just get out in the shop and have fun practicing and learning, I personally learned what not to do from each piece of designer firewood I have built in the last 30 years. Bill Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.