Recommended Posts

Posted

I know people love or hate these things but I have wanted to try one for a while.

I picked up a 16/32 for $400 today. It looks brand new expect for the dust (not even sawdust) on it. Seller claims his brother bought it and used it a few times them sold it to him and he never used it.

Now I have to buy some sandpaper.

What grits do you normally use on here?

Has anyone switched out the top for the 4" dust port?

post-1659-0-96924000-1332429490_thumb.jp

Posted

I know people love or hate these things but I have wanted to try one for a while.

I picked up a 16/32 for $400 today. It looks brand new expect for the dust (not even sawdust) on it. Seller claims his brother bought it and used it a few times them sold it to him and he never used it.

Sounds like a great deal!

What grits do you normally use on here?

I've been satisfied with the 80 and 120 grit that came with mine.

Has anyone switched out the top for the 4" dust port?

Paul-Marcel has a video (http://www.halfinchshy.com/2011/04/upgrading-performax-16-32-to-sandsmart.html) on upgrading the dust hood as well as the speed controller. The new "Sand Smart" controller is nice because it will slow down the feed rate in order to keep the motor from drawing too much current and possibly tripping it's breaker.

Posted

Thanks Don

I was wondering about that I saw a one page instruction sheet in the manual that was for a converyer belt upgrade maybe he already did it.

Knokers thanks for the video that is perfect. I have the 1hp motor so I don't think the speed controller would work.

Posted

I put a Dust Deputy between the sander and my shop vac. It catches 95 percent of the dust. 36 grit for flattening rough sawn wood, 60 or 80 grit to take thickness down , 120 or 150 to smooth out marks from coarser grits. The harder the wood and the finer the grit means take a very small amount off in each pass. 1/8 th of a turn on the handle is a lot if you are sanding maple with 150.

Do the instructions tell you about slightly tilting the head? If the open side of the sander is about the thickness of a sheet of paper higher than the inside edge it prevents a line/groove when you do wide stock in 2 passes. We often sand the edges of strips and do one pass at the outside, then flip the stick and do the second pass at the same setting on the inside edge. That slight difference let's you clean up both sides at one setting.

Another tip is when you have a bunch of boards to sand ,run them right behind each other. I like to run a scrap first and last when batch sanding,it will catch any slight snipe. Helps if you have someone to catch on the back side when you are running. A lot of parts this way.

220 grit makes boards very silky smooth but it is very easy to get a burn. Very light passes and clean the paper often!

Enjoy your new tool!

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 52 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined