Recommended Posts

Posted

Hello all, I am 26 years old and wanting to start a lifelong journey with woodworking. I have been accumulating tools the last few years. However, it seems like there is always one more tool I need before I can really get started.

What are your thoughts on the best way of starting out? Which projects should I work on and which tools are probably most important? I have a table saw (though it is really light weight), trim router, sliding miter saw, drill, biscuit joiner, and various hand tools.

Also, does anybody know of any really good deals on tools? I especially need some block planes, a bench vise, corded circular saw, and jigsaw. I was thinking about getting a Bosch 1590EVSL Jigsaw which sells for about $170. Anybody think there is one better that is cheaper?

I would really appreciate any input/suggestions anybody has to offer.

Also, I am in Memphis, TN. So if anybody out there who is from Memphis wants to take on an apprentice... :)

I look forward to taking my first steps on this journey!

Posted

Welcome. I started woodworking when I was abou 29. It's a great time to pick up a new hobby because you have plenty of time to improve :D

I personally think making or building and setting up a router table is a huge improvement for any shop. Even though I use a lot of hand-tools in my woodworking the router table gets used just as much if not more than any other tool in the shop

The Bosch is a GREAT tool I have the 1591 (the barrel grip version). I like the lower center of gravity.

http://www.amazon.com/Bosch-1591EVSL-120-Volt-Barrel-Jigsaw/dp/B004323NOG/ref=sr_1_3?ie=UTF8&qid=1334762243&sr=8-3&tag=digitawoodwo-20

I had a cheap jigsaw for years and never used it. Then I got the Bosch... now I use it all the time for rough stock breakdown and for cutting curves. (I dont have a bandsaw yet)

Posted

what i have been told and read time and again and find it to be true is buy the tool you need at the time. but there are a few tools that are perfect for starting out and can be used for a multiple uses.

1. table saw

2. band saw

3. jointer

4. planer

5. dust colllection system

6. decent sander because you will sand more then cut

then start buying extra stuff like:

hand planes, scrapers, lathes, scroll saws, ect......

after you buy the big 6 figure out what you want to make if it cabinets buy towards that goal, if its craft iteams then buy speclty iteams like a lathe for decrative bowls. but with the first 6 you can make just about anything you want to make. the best advice anyone gave me was buy the better tool since it wont lose its value and plan it out ahead of time so that you can be efficiant and safe in your shop.

Posted

Dear Duckkisser,

i think your Big Six tools (up against Big 5 of African wildlife) is a great piece of advise...!!!

I am from India New Delhi and a Human Resource Professional in a large Information Technology Company. Currenty deputed to Dubai in United Arab Emirates on a fixed term assignment. In India (being quite a different country companred to where rest of our fellow members on woodtalkonline mostly belong) we dont have access to good power tools and even if they are available, they are quite highly priced. thats primarily the reason why more than 80% of professional wood workers here prefer to work with handtools. Due to economic challenges i could not afford to buy any power tool back home in India except for a small drill. But i was pleasently surprized rather "Thrilled" to see the quality and variety of power tools in the local hardware markets when i landed in Dubai for my official assignment. I have been looking to start building up for my hobby shop and carry top 5 tools from Dubai on my way back to india to get best of the quality and latest technology based tools.

Since I am a beginner i was finding it very hard to visualize and identify what type of tools should i buy that will help me start my hobby shop and cover most of my needs in making basic furniture items. You have unknowingly solved my entire problem and I am very thankful to you on that :)!!

I dont know whether we will ever get a chance to see each other in this life. but I would like to say that I owe you a Treat for this. Do let me know if you ever plan to come to New Delhi India Or Dubai (in next 6 month) :)

Cheers

Atif Hasan

Posted

Surprising I am going to India.......India Illinois. Glad I could help to a far off brother but It's not my advice just the advice I was given and pushing forward. Just a tought if it's hard to get tools might be hard to get sandpaper maybe you should get card scrapers http://www.finewoodworking.com/pages/w00007.asp

http://www.finewoodworking.com/SkillsAndTechniques/SkillsAndTechniquesArticle.aspx?id=5299

Posted

Welcome to the forum and to the wonderful world of working wood!

I'll go against the grain set above and recommend that you buy into the costly, massive power tools more slowly. Here's why--my experience. At your age (okay, I'm a lot older now) i had the energy and time but not the money or tools (of course, now I've got the tools but no energy and less time). And, whereas now I'm established with steady employment, I moved a bit when younger--and plays havoc with big equipment. So, I suggest that your first project be a workbench! Make it a knock down bench. Buy or check out from the library several good ww books on the subject. Buy the best quality vises, plan the heighth for the average of what various tool require, and build that sucker solidly! Once you've built a work bench that has clamping and vise options, it'll be the center piece for both power and handtools. It's amazing how often I can get the job done w/o my tablesaw, bandsaw, or routers when working on the bench. Hand tools are safer than power tools; but what's holding the wood is what determines just how safe any operation might be. A big bandsaw is far more versatile and safer than a TS but it's not as cool. It takes up less space, etc. And, the BS will never fling a piece of bound wood back at you at 50 mph. TS will. So, I encourage you to build a quality bench with ample tool storage beneath!!!!!!! Cause having adequate space for all those future tools IS A BIG deal for fighting rust and loss.

Best of wishes,

from down in the bayou....

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 37 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined