Tony Wilkins Posted April 24, 2012 Report Posted April 24, 2012 I'm about to be medically retired from the Army and my finally have the time and space to do something I've been interested in - woodworking. Never been too keen on all the laser guided saws all over a 1000 square foot workshop and severe PTSD makes the noise a bit of a downer too. So I want to do unplugged woodworking as it were. Where do I start? I have no tools but willing to get anything I need. Figured I start with a very simple project first - like a box then building up to a shadow box for some patches I brought back from Iraq. Quote
42andrising Posted April 24, 2012 Report Posted April 24, 2012 Hi Tony, First of all, thank you for your service. The PTSD will get better (I'm sure you've already heard that over and over). I've just joined the Hand Tool School (http://www.handtoolschool.net) and haven't yet started building anything, but he covers the basics and incorporated projects into the lessons for things that you use to build more projects (e.g.: shooting boards, miter boxes, a sawbench, etc.). The first lesson is free and is basically an overview. The guy that puts it on is named Shannon Rogers. He's active on this forum and also has a free podcast (http://renaissancewoodworker.com/) Good luck! Quote
Jonathryn Posted April 25, 2012 Report Posted April 25, 2012 Here's a link to Roy Underhill. Woodworkers of all levels can learn from him, and he's entertaining and relaxing to watch. He'd be a good place to start to get a feel for things. Quote
nateswoodworks Posted April 25, 2012 Report Posted April 25, 2012 Tony, another BIG thank you for your service and protecting my family, forever gratefull. The plan to start out small is a wise one, for many reasons. I feel the main benifit is that you will get a few tools and learn to use them before needing more. One question, are you planning on buying pre-milled wood or starting with rough stock? That will really change the tools you need to get started. One other thing, The Handtool School is a big hit but I would really suggest http://robcosman.memberlodge.com/. For $20 a month you can get 2 30 min. videos a week and a whole bunch of previous videos which started out with a small project and has been ramping up to larger projects. Everything is taped which gives you a huge insight to what you need to do to get the results you want. Everything from jointery to sharpening, to planing and so on. I have nothing to do with Rob other that being a very happy viewer and respect him as a man and a woodworker. For $20 you just can't go wrong, and if you like it you get a discount for paying by the year. Please keep us posted on your journey and thanks again! Nate Quote
Tony Wilkins Posted April 25, 2012 Author Report Posted April 25, 2012 Been watching Roy Underhill on and off for years. I'll looking into the class. Have an idea for my first project. I make balsa wood airplanes and I've never found a good organization for the paper that you put around the structure. I have the idea for a simple box with a dowel to fold over the sheets. What is a good first wood to work with and what saw(s) would be a good to cut out that simple box. Quote
Tony Wilkins Posted April 25, 2012 Author Report Posted April 25, 2012 Thanks for the info Nate. I am thinking that pre-milled would be good to start out with? One less thing to worry about right? Quote
Vic Posted April 25, 2012 Report Posted April 25, 2012 For a bit of inspiration, Tom Fidgen has a great book called Made by Hand. It's a Popular Woodworking Book. He takes you through several projects in the book. I would also recommend The Hand Tool School. Again, thank you for your service. I hope you find comfort in the soothing sounds a sharp blade against wood. Although I use power, I get the most lost when I'm working at the hand tool bench. Quote
fransikaner Posted April 25, 2012 Report Posted April 25, 2012 Thank you for your service to our country, Tony If you feel the need for power tools, take a look at the Proxxon line. They are small in scale, but I cannot speak to the noise levels. Do take a look at hearing protection. If you access Marc's Shop - Amazon, you will see some of the tools and supplies he uses. 3M, Howard Leight, and Peltor make AM/FM/MP3 versions if you feel the desire for some background noise. If you start generating significant dust, do take the time to determine what protection you might need. I love the balsa-framed approach and think you will find it very rewarding. I built balsa planes as a boy and never seemed to graduate from the X-acto cuts. I also found ship models to be quite challenging. Best of luck to you and pls do stay in touch either on the forums or by using the PM feature. You don't need to do everything at once and you will find there are some truly amazing folks here ready to assist.. Quote
Tony Wilkins Posted April 25, 2012 Author Report Posted April 25, 2012 Thank you all for you replies and kind words. I'm sure I'm going to be asking a lot of questions as I ease my way into this. Quote
Tony Wilkins Posted April 25, 2012 Author Report Posted April 25, 2012 Thought I'm usually one who prefers to 'Buy American' I'm really liking the look of the Japanese stuff - especially saws and maybe planes. Is there a good resource besides here on them? Quote
Vic Posted April 25, 2012 Report Posted April 25, 2012 Tony, if you want to find out more about Japanese tools, you are start looking here http://giantcypress.net/ ; http://digitalwoodworker.com/ ; http://thecarpentryway.blogspot.com/ I you look on "link" from Giant Cypress, you will find places to peruse and buy Japanese tooling. Quote
Tony Wilkins Posted April 25, 2012 Author Report Posted April 25, 2012 Just ordered the two books mentioned. They'll be here Friday. Quote
Tony Wilkins Posted April 26, 2012 Author Report Posted April 26, 2012 Just made a post in the design section requested help with my first project here: Quote
Onboard Posted April 26, 2012 Report Posted April 26, 2012 Just ordered the two books mentioned. They'll be here Friday. I wasn’t sure what two books you are referring to Tony, but it sounds like you have an interest in Japanese hand tools. I was wondering if one of the two books was “Japanese Woodworking Tools: Their Tradition, Spirit and Use” by Toshio Odate? If not, I just wanted to point this book out to you as one you might want to take a look at. I’ve never seen the book, but it seems to have good reviews. Quote
Tony Wilkins Posted April 26, 2012 Author Report Posted April 26, 2012 I wasn’t sure what two books you are referring to Tony, but it sounds like you have an interest in Japanese hand tools. I was wondering if one of the two books was “Japanese Woodworking Tools: Their Tradition, Spirit and Use” by Toshio Odate? If not, I just wanted to point this book out to you as one you might want to take a look at. I’ve never seen the book, but it seems to have good reviews. They were actually Made by Hand and the New Traditional Woodworker books mentioned above. Just found the book you mention and was wondering about it. Might have to get it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.