baok Posted April 27, 2012 Report Posted April 27, 2012 So you use a rip saw to cut along the grain and a crosscut saw to cut across the grain. What do you cut miters with? Either one? Quote
theapprenticeshand Posted April 27, 2012 Report Posted April 27, 2012 Well, a miter box saw is normally a crosscut saw. Though a crosscut saw isn't ideal for a 45, there is still enough cutting across the grain so that a crosscut saw will work. --Brian Quote
HoboMonk Posted April 27, 2012 Report Posted April 27, 2012 Well, so, okay, basically I use a crosscut saw. Blessings. Quote
Bombarde16 Posted April 28, 2012 Report Posted April 28, 2012 Agreed. For 45 degree miters, crosscut teeth are your weapon of choice. This thread begs the question, however, at what miter angle would you switch over to a ripping saw? Quote
theapprenticeshand Posted April 28, 2012 Report Posted April 28, 2012 Agreed. For 45 degree miters, crosscut teeth are your weapon of choice. This thread begs the question, however, at what miter angle would you switch over to a ripping saw? >45, only because my miter box won't cut much beyond that. In addition, you can always crosscut with rip teeth, you'll just get tearout. But, if you cut it a touch long, you can shoot the ends and get rid of that. --Brian Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.