CessnaPilotBarry Posted May 11, 2012 Report Posted May 11, 2012 Remember the old saw about antique tools in like new shape? The one about they tool being defective, so nobody used it? I picked up a really nice, 1-1/2" socket chisel for $20. The back is way, way, convex, and least flat parts are all in the 1/4" nearest the edge. Can anyone share some tiips that might make the flattening process easier? I've thought of inking the back, then relieving the very high spots with a Dremel, going back and forth between the Dremel and an XC DMT plate until I get close with fresh ink. Any and all suggestions on how to most easily fix this are welcome. Thanks! Quote
theapprenticeshand Posted May 11, 2012 Report Posted May 11, 2012 Take a file to the back? Use a belt sander maybe? Quote
Bombarde16 Posted May 11, 2012 Report Posted May 11, 2012 +1 on the belt sander. Keep a cup of cool water and dip often. Quote
CessnaPilotBarry Posted May 14, 2012 Author Report Posted May 14, 2012 Thanks, guys! I'll give that a shot. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.