duckkisser Posted May 19, 2012 Report Posted May 19, 2012 went garage saling and found a couple of planes. one is a old stanley and the other is a sargent 22 inch plane. (8 dollars) also came across a large stanley bevil gage #18 its the largest one i have ever seen. (2 dollars) also picked up some deer antlers that ill end up trying to make pens out off. (2 dollars) best part is i found a blacksmith that lives 20 min from my house. spent a couple hours talking with him about his shop the forge and anvils he makes and sells. he teaches blacksmith classes in the winter and fall. he might do a demonstration at my school. also talked to him about making some wood carving chisels and possibly swapping some work for some wood turned handles. (sold him a ring holder for 4) so all in all good day.....can someone help me figure out what type of planes (have no plane exp)they are and what there worth? Quote
bkbiggs Posted May 23, 2012 Report Posted May 23, 2012 The 22" plane is probably a jointer plane, just based on the length of the sole (although I think that is a "tweener" - between a fore plane and a #8 jointer). I would call it a #7. What's the other plane look like? (blade width, sole length) The value of the planes isn't going to be my forte' - I hope someone else chimes in on that. Quote
duckkisser Posted May 23, 2012 Author Report Posted May 23, 2012 the other one the blade is curved havent seen to many of those at a garage sale's they are usually the normal strait blade. the blade is probably 2 inches wide and the bed is around 12 inches. Quote
ChrisG Posted May 23, 2012 Report Posted May 23, 2012 Like bkbiggs said the 22" Sargent is a jointer equivalent to a Stanley No. 7. Sargent used a different numbering system. Their numbers typically included the length of the plane in them - for example I have a Sargent 24" jointer that is numbered a 424. Check for the number 422 on yours. For more details you will want to post some picks. The better Sargents were those made before 1918 and labeled VBM (Very Best Made) - this is what mine is and its a very good user jointer. I've also used ones that were not the VBM line but still good users. Quote
nateswoodworks Posted May 27, 2012 Report Posted May 27, 2012 Could the one with a curved blade be a scrub plane? Quote
duckkisser Posted May 27, 2012 Author Report Posted May 27, 2012 could be nate i know next to nothing about planes so when i looked it up it says its saposed to be used at an angle rather then with the grain. going to see how well it works when i get in the shop this afternoon. thanks for the tip because it could be or it could just be a cove cuting plane. i know back in the day a carpenter would have stacks of planes with different profiles so he could make different trim on the boards. Quote
Grumpy Badger Posted June 16, 2012 Report Posted June 16, 2012 Could be a scrub plane, but could also be a jack plane with a heavy camber on the blade. That's the way I ground and sharpened my Sargent jack plane, on the advice of Chris Schwarz, and it works great that way. The purpose is for taking off a lot of material cutting across the grain. Much like a scrub plane :0) Also, your plane sounds like a jack plane, but 12" is fairly short for one of those. Good luck! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.