Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Buy versus make my own skew chisels

Featured Replies

Is there a reason to fork out cash to buy skew chisels? Wouldn't it make sense to use an extra chisel I have in my shop or is there some metalurgic reason I'm missing?

get high speed steel at least if you making lathe skew. you can make a handle yourself on a lathe. a high speed steel tool will hold a edge longer and it is better at absorbing the fiction of a turning piece of wood.

I think you are talking about bench chisels, not turning chisels. Right?

I made my own. I used a pair of Narex 10mm chisels and sharpened them to about 30 degrees skew angle. I find them very useful in trimming dovetails and cleaning out glue squeezeout in tight corners. They seem to hold their edges about as well as the straight ground Narex chisels I have.

The chisels cost less than $10 apiece which is much less than any other skew chisels I have seen.

If your referring to bench chisels there's a good article on making them in this months Shop Notes . I plan on making mine own in between projects . The projects calls for 1/8 x 3/4 O1 flat stock , which can be had from McMaster Carr .

If you have a couple of extra chisels around a little time at the grinder and you are set to go, just go slow and keep it cool as not to take the temper out of the steel. If you don't have any to spare Narex has a set that is $3.50 more than buying and grinding a skews yourself, I think they came out with these about a year ago and this was the route I went. This being said I I am going to make a version of a Fishtail chisel, having only one chisel to have on the bench is a benefit that in my opinion makes it a better choice. You just need to grind the fishtail, or dovetail, into the the last 5/8" or so as that is that would accommodate pretty much any job it's needed for . People have been doing this for ages, this was the first pic I could find but I plan on not grinding the sides as far back as this pic shows as I feel it would make for a stronger chisel, but this is just my opinion. I found this pic at LJ posted by Mafe.

01dovtailupgrade.jpg

  • 3 weeks later...
  • Author

You guys were right in that I was asking about bench chisels. I saw some L/N chisels at their Chicago hand tool event and they're nice, but crazy expensive...unless there is some reason to save the $$$ for them because they're THAT cool. Thoughts?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.