Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing table before of after assembly.

Featured Replies

Hello, I'm making a black walnut end table, and I'm about to be ready to start the assembly process, but I don't know if I should apply the finish before or after the table is put together.

I am planing on using an oil finish, sanding it with danish oil to make a slurry and seal the pores.

Thanks

I rarely finish before assembling my work. Just be very careful with glue squeeze out. I like to use a plastic straw cut at an angle to remove glue from tight corners. Clean rag and water gets the rest of the squeeze out, then sand carefully . Sometimes I will use blue tape to protect a part from glue squeeze out.

If you finish first with oil you have to protect all the glue surfaces from the oil , then still have to clean up any squeeze out after assembly, which leads to finish touch up,etc,etc,etc... Plus what happens to finish if there are clamp marks to sand out?

Usually only the tabletop has filled pores. I finish tabletops separately and then install them to allow for seasonal wood movement. Furniture buttons, figure eight hardware, or screws with elongated holes , just some way for the top to move. I finish the underside of solid wood tabletops to achieve a balanced panel and slow any changes in moisture content.

Depending on the complexity of the base I may finish before assembly, how hard is it going to be to get into the tighter areas? The top, I'd wait till the base was done then finish the top and attach like stated above.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.