nateswoodworks Posted June 1, 2012 Report Posted June 1, 2012 I finally got my hands on a toaster oven at a garage sale that is now known as "The Japaninator" , for some odd reason my wife wouldn't let us do it in the kitchen oven! Have any of you done this before and if so any tips. I have came across a recipe in which you take 2 parts linseed oil, 5 parts turpentine, and 3 parts asphaltum powder, mix it up and paint it on, cook at 400 degrees. My kids and I are going to try it on a few scraps of steel and go from there. I have thought of a few other things that may be cool to be Japanned if it all goes well. So any input? Thanks for your time! Nate Quote
flairwoodworks Posted June 1, 2012 Report Posted June 1, 2012 I just read another thread about Japanning an hour or two ago! Here are two resources: http://mvflaim.wordpress.com/2011/07/24/re-japanning-a-plane/ http://www.inthewoodshop.com/ToolRestorations/Restoring%20a%20Stanley%205152.html I also read about a mixture of 1 part linseed oil and 1 part asphaltum powder. Here's a link to the forum thread (I think you need to be registered with the forum to read): http://forums.delphiforums.com/burl/messages?msg=990.1 Quote
jmk89 Posted June 1, 2012 Report Posted June 1, 2012 My recipe (which I have used with success) is: /> 1 teaspoon shelllac flakes 1 teaspoon asphaltum 1 teaspoon BLO enough meths to dissolve but no more (about 1.5 teaspoons). Paint on and let dry. Repeat. Put in 200*C oven for 2 hours and let cool in the oven Good luck Screwing up in new ways every day Quote
Nick2cd Posted June 2, 2012 Report Posted June 2, 2012 so...........what exactly are we talking about? im not sure if we are getting ready to make sushi or doing something to steel chisels? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.