rubus Posted June 26, 2012 Report Posted June 26, 2012 I have an opportunity to purchase a General tablesawI model 50-175. does anyone out there have experience with this model? Quote
HuxleyWood Posted June 26, 2012 Report Posted June 26, 2012 Typical Asian contractor saw very simialr to the Grizzly G0444Z, has a pretty solid fence and overall a solid saw for what it is. About a $300 saw used. Quote
croessler Posted June 27, 2012 Report Posted June 27, 2012 Rubus, I would have to say that the General is anything other than typical. I have owned a 50/185, which is the left tilt version of the 175, for nearly 7 years with absolutely zero issues. I bought it new and have cut everything from sheet goods to rough 8/4 Hard Maple. I have posted a link to the review I did of the saw over on lumberjocks. If you have any specific questions please feel free to PM me at any time. Quote
knotscott Posted June 27, 2012 Report Posted June 27, 2012 For clarification, this is a General "International" saw made in Taiwan, not to be confused with the Canadian made General saws. The GI contractor saws (50-175/50-185) were among the best in this class IMO (Fine WWing seemed to agree). I owned the 50-185 from 2003 to 2005....I was very happy with the saw. It's very similar to the PM64a (~ $950-$1000....), and similar to the Griz G0444Z style saws. The GI featured solid cast wings, a very heavy duty cast iron miter gauge, and a the General T-fence homeshop version, which is one of the better Biese clones IMO. They sold new in the $700-$800 range, and offered a choice of 30" or 52" rip. The general rule of thumb is 50% of new with considerations for condition, age, extras, etc. $300 would be a great deal....$500 not an uncommon asking price, though higher than I'd advise paying unless it's mint and comes with a mobile base, router table, blades, etc. How much are they asking? Quote
croessler Posted June 27, 2012 Report Posted June 27, 2012 Knotscott brings up an interesting point... When I was in the market it came down to the PM 64a and the General International. I could not find a big enough difference between the two other than the cost. which for me came in at nearly $400 cheaper than the PM. The Fence is outstanding, i've never had an issue. I did upgrade to a aftermarket mitre gauge. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.