Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing studs

Featured Replies

I'm thinking about starting a large sculpture (6'x4'x4') whose form will be constructed by laminating quite a bit of wood and (power) carving to the final form. Unless I can think of another way to make these forms, I am seeing quite a bit of waste in my future.

Now, with that said, I can't justify the high cost of a real hard wood for 70+% waste, which ultimately might just be an experiment. So, my bright idea is to just laminate studs together to get my mass.

Ok, problem solved. New problem...studs are sooooo soft. What kind of finish could a fella put on to give it some strength and durability? Would a penetrating oil help and then some kind of poly?

Depending on what part of the country you're from, the framing lumber will be Douglas Fir, Hemlock, or Southern Yellow Pine. There may be other species I'm unaware of. I'm in the NW, so HemFir is what we have. I would buy what you need, let it acclimate in the shop awhile. Framing lumber tends to be very wet when delivered on site. As far as a finish, I'd go with an oil then maybe shellac, if this will be housed inside. I'm assuming it won't have items placed on top of it that could leave water or alcohol rings. As far as protection from dings, that finish will at least allow repair.

(null)

Also, if there is any building going on in your area, stop by and ask if you can go through the scraps.

(null)

  • Author

I'm from the midwest. I'm guessing it is pine. I don't predict water rings, but it might suffer some dings. Is shellac a durable enough finish?

Shellac's durability is panned for a.) water stains b.) high heat and c.) liquor spills. It's not an outdoor finish either. But, barring any of those afflictions, you'd be fine with shellac. As Vic points out, it's a very repairable finish as well. Add to that that it goes on, dries rocket fast and therefore builds a film much quicker than other varnishes and it's a strong contender.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.