Recommended Posts

Posted

ok i bought a flex shaft carving tool and just got it today. so after 3 hours of playing with it and getting frustrated and happy with it at the same time I decided to keep it. the tool works well at least right off the bat after a few months of use ill decide then. The only thing that frustrated the experience was the hanger that come with the motor. the design is well...... sucky. it is shaped like is a large U that curves in too two small holes to hang the tool by. Only the 1/2 h hp motor is strong enough that the motor twists on the hanging bracket. and the hanging bracket pops lose and the entire thing falls to the ground. I was sitting in the front yard to show off and to keep my family’s home clean and tried running the tool. the motor fell from the hook the first time and i thought it was a fluke on the second time the bracket poped lose and went flying off. i still haven’t found the bracket after spending a hour raking and using a magnet to search the lawn. finally i went and got a clothes hanger bent it into a U shape and added a cross bar going between the two sides to help support the metal arms of the bracket and spent last two hours playing with burrs, etching glass and stone. I was basically giggling like a little school girl with glee bouncing up and down in my seat. i can seriously see myself carving my lathe turnings.

I still have to seriously carve something worth wild before I decided to keep the tool or not.

Posted
I was basically giggling like a little school girl with glee bouncing up and down in my seat.

Maybe you should move to the back yard. :)

-- Russ

Posted

At 1 hp you've got a LOT of torque under the hood - zero to sixty in under 2 seconds. Are you sure you got a carving motor and not a drive shaft for a Lambo?

that should have been a 1/2 hp still more then powerfull

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined