SeanWalker Posted July 27, 2012 Report Posted July 27, 2012 Marc, I searched TWW site and didn't see anything about the rasps you use for shaping the wood. Can you elaborate on which ones you use? Thanks again, Sean Quote
woodwhisperer Posted July 27, 2012 Report Posted July 27, 2012 i have two Nicholson's 49 and 50 and I have a small 7" rasp from Auriou: http://www.highlandw...delersrasp.aspx Over time, I hope to get some more Auriou rasps. They are pretty flippin' awesome. Quote
CessnaPilotBarry Posted July 27, 2012 Report Posted July 27, 2012 Grammercy Tools also makes excellent hand stitched rasps. They're available from Tools for Working Wood. Quote
pagel Posted July 28, 2012 Report Posted July 28, 2012 Liogier is another option. They're a French company that manufactures hand-stitched rasps and rifflers that some say rival Auriou. They have a cool video showing the hand stitching process. After watching it you'll understand why premium, quality rasps are so expensive. Liogier website - http://www.hand-stit...sp-riffler.com/ Quote
PaulMarcel Posted July 28, 2012 Report Posted July 28, 2012 I can now watch that video safely... because after watching their other videos, I got a set. Very very nice. A friend came over who has been doing a lot of shaping for a half-houseful of Maloof-inspired furniture. He fell in love with them even after using some other premium rasps. Damn YouTube... 1 Quote
walnut_weasel Posted July 28, 2012 Report Posted July 28, 2012 Check out Iwasaki carving files at Woodcraft (currently on sale) and Highland Woodworking. They are much much less expensive and wicked fast cutting. Even though they work more like a float than a rasp I still don't have a problem cutting across the grain using a diagonal cut. Quote
walnut_weasel Posted July 28, 2012 Report Posted July 28, 2012 Here is a site comparing the two. FYI - The key to using these files is using almost no downward force. Even the fine file cuts so fast it will bury the teeth in the wood. http://www.fine-tools.com/carvingfile.html Quote
woodwhisperer Posted July 28, 2012 Report Posted July 28, 2012 Moving this bad boy to the Neanderthal section. Quote
HoboMonk Posted July 28, 2012 Report Posted July 28, 2012 Know-say: I've been using Iwasaki carving files for several years. Previously, I used the best handmade rasps I could find - for decades. Iwasaki wins hands down. Quote
walnut_weasel Posted July 28, 2012 Report Posted July 28, 2012 Sounds like a good WoodWhisperer mini episode! High-end rasp vs. Iwasaki! Quote
woodwhisperer Posted July 28, 2012 Report Posted July 28, 2012 OK since I already dropped too many bones on several Auriou rasps, who wants to send me some fancy Iwasakis? Quote
pagel Posted July 28, 2012 Report Posted July 28, 2012 As an aside, It's funny how so many of us start with, "Wow, a new power tool", then 'evolve' to rasp rapture... Where is the bottom? Clovis points... Quote
CessnaPilotBarry Posted July 28, 2012 Report Posted July 28, 2012 Marc, I'd loan my Grammery rasps for a comparison. Quote
Trip Posted July 28, 2012 Report Posted July 28, 2012 ==> Clovis points... ever seen the "Dawn of Man" opening from Kubrick's 2001? Thinking hammer... Quote
croessler Posted July 29, 2012 Report Posted July 29, 2012 So obvious question: Left or right handed option? I am a lefty who has always had to use tools meant for righties. Would it work out or just confuse the mess out of me? Quote
pagel Posted July 29, 2012 Report Posted July 29, 2012 ==> Clovis points... ever seen the "Dawn of Man" opening from Kubrick's 2001? Thinking hammer... Oh yeah, but I was thinking about the monolith as the ultimate sharpening stone. If there was ever a chance for humanity to achieve the perfect edge that was probably it... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.