Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

General Finishes Enduro Water Base Lacquer experiences

Featured Replies

Have you used this?

Dish!

My favorite water based "lacquer" product has just become a pain to get locally. I can get the GF product locally, so I'm thinking of switching. Of course, I'm planning to shoot some test panels. I have a 4 stage HVLP, so equipment is not an issue.

Any thoughts and opinions are welcome on Enduro.

Thanks!

I've used it for almost 9 years, since it was originally developed by Compliant Spray Systems. It is great, & I use it almost exclusively. The Poly is great also. Are you planning on using the sanding sealer underneath?

4 stage HVLP no issues, I use a #3 tip.

If you are going to use it on a surface that will get alot of use, use the catalyst to help long term durability and endurance.

  • Author

Thanks!

Do you use the sealer, or do you let the finish self-seal?

The sanding sealer for my current product is easier to sand than the top coat, so I normally use it if I'm not using an oil stain and shellac barrier.

The sanding sealer is formulated to sand easier so you get a smoother top coat. I typically use it over WB stains and dyes as the first coat, then add grain filler if needed after that before the top coats.

I usually do one coat of sanding sealer, then two top coats

  • Author

The sanding sealer is formulated to sand easier so you get a smoother top coat. I typically use it over WB stains and dyes as the first coat, then add grain filler if needed after that before the top coats.

I usually do one coat of sanding sealer, then two top coats

Thanks! That's exactly the same process I've been using with Ultrastar as well as the solvent products I formerly used.

I picked up small cans of SS, and the WB lacquer and poly top coats to do up some sample panels this week.

Hey guys, according to ML Campbell you don't need to use a sealer underneath their clear coat, just a thought. You save a step.

  • Author

Hey guys, according to ML Campbell you don't need to use a sealer underneath their clear coat, just a thought. You save a step.

I've been using ML Campbell Ultrastar since 2005. It's my favorite water base finish, but due to a distribution change, it's become difficult to get locally, so I'm investigating Enduro as a replacement.

I know MLC says on the PI sheets that a sanding sealer is optional, but over the years I found it worthwhile on raw wood. Their water based sanding sealer seemed to raise less grain than the top coat on bare wood, and was a lot easier to sand. The durable urethanes in the top coat are gummy, and the paper clogs much faster during the heavier sanding required to smooth raised grain. I also found that the sanding sealer dried to a higher gloss than the top coat sheens I usually use, so it was easier to see defects, as well as tell where I had scuffed.

If I've used an oil stain, or used my BLO / turpentine / shellac mix to color the wood, I'll skip the sanding sealer, as grain raising is minimal, due to the sealing action of the stain binder or shellac in the brew. I'm not going to aggresively sand a colored surface anyway, for fear of damaging the color layer.

  • 2 weeks later...

Have you tried the ML Campbell Augalente? It's a pre cat acrylic water Bourne . Sanding sealer is available as well. Tough finish for woodwork. It is basically the replacement for Ultrastar. I get mine from Wurth Supply.

Sanding just the top coat is more work! It gums up the sandpaper . Sanding sealer sands to a white powder and brushes off the sandpaper easily. Sprayed and sanded 1 1/2 gallons of it today then topcoated it with Agualente . 38 drawers look furniture grade'

And stained pieces take extra care to keep from sanding thru so we put 2 or 3 thin coats of sealer on then sand very carefully. Touch up any sand thru's and shoot a top coat.

Its all I use. The poly is tougher then the Laquer. I use is with a accuspray conversion gun, bought it from compliant spray systems.

They just reformulated the finishes. The laquer sprays easy.

Use a sanding sealer first. You'll be a happy camper with it

General Finishes Enduro water-based "Lacquer" is more Acrylic than Urethane, which makes it more cost effective. However, less protective. Good for items requiring less protection, such as picture frames, clocks, mantels.

General Finishes Enduro water-based "Clear Poly" is more Urethane than Acrylic, which makes it more expensive, however is more durable a finish. Acrylic by itself is too hard, usually you modify with a urethane to add toughness and flexibility. The more you add the more expensive it becomes.

I spray with a compressed air LVLP spray gun. Never had an issue. Have also sprayed it with el-cheapo compressed air spray guns, no issues either.

-Ace-

I'd love to use Agualente... The local distribution issue is ML Campbell products in general.

I mentioned this post to a rep at the ML Campbell booth today at IWF. He said he would look into your problem, he seemed surprised anyone in the north east could have supplier issues. I also looked at General Finishes booth, they have some impressive stuff that I want to try out. It sure is fun that all the big suppliers and manufacturers come to Atlanta every 2 years. We get to play with all the stuff that is new and improved. Lots of catalogs and freebies plus a few tools and a new 4 sided diamond sharpening stone!

  • Author

Thanks, everyone for the information! Some follow-up...

I did some test strips with Enduro satin, as well as the water based sanding sealer, and I'm really happy with the results. On white oak, I'm using the same dye concentration I used with Ultrastar, 1 drop Transtint Amber to 8 oz. finish. I'm very impressed with Enduro's ability to be applied with a foam brush, too.

WW... I really appreciate you mentioning the issue to the rep. Remember, I'm a retail purchaser, so I'm dealing with a paint store, not directly with an MLC rep. I think the root of the issue involves minimum orders, and I'm the only guy using these products. Most of the store's customers are fat, dumb, and happy with Minwax polyurethane and the like...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.